[PATCH] arm64: dts: imx8mp: Simplify USB C on DH i.MX8M Plus DHCOM PDK3

[Marek Vasut]

Remove the connector as well as all the links and only connect the
PTN5150 with xHCI controller. This is sufficient to implement the
role switching.

Furthermore, this makes resume work without hanging. Without this
patch, the platform would hang on resume of 'connector'.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Frieder Schrempf <frieder.schrempf at kontron.de>
Cc: Geert Uytterhoeven <geert+renesas at glider.be>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Magnus Damm <magnus.damm at gmail.com>
Cc: Marek Vasut <marex at denx.de>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
 .../boot/dts/freescale/imx8mp-dhcom-pdk3.dts  | 58 ++-----------------
 1 file changed, 4 insertions(+), 54 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
index a5d74b06f732d..b749e28e5ede5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -35,33 +35,6 @@ clk_xtal25: clock-xtal25 {
 		clock-frequency = <25000000>;
 	};
 
-	connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port at 0 {
-				reg = <0>;
-
-				usb_c_0_hs_ep: endpoint {
-					remote-endpoint = <&dwc3_0_hs_ep>;
-				};
-			};
-
-			port at 1 {
-				reg = <1>;
-
-				usb_c_0_ss_ep: endpoint {
-					remote-endpoint = <&ptn5150_in_ep>;
-				};
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -202,24 +175,10 @@ typec at 3d {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ptn5150>;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-
-						ptn5150_in_ep: endpoint {
-							remote-endpoint = <&usb_c_0_ss_ep>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
+				port {
 
-						ptn5150_out_ep: endpoint {
-							remote-endpoint = <&dwc3_0_ss_ep>;
-						};
+					ptn5150_out_ep: endpoint {
+						remote-endpoint = <&dwc3_0_ep>;
 					};
 				};
 			};
@@ -306,16 +265,7 @@ &usb_dwc3_0 {
 	usb-role-switch;
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dwc3_0_hs_ep: endpoint at 0 {
-			reg = <0>;
-			remote-endpoint = <&usb_c_0_hs_ep>;
-		};
-
-		dwc3_0_ss_ep: endpoint at 1 {
-			reg = <1>;
+		dwc3_0_ep: endpoint {
 			remote-endpoint = <&ptn5150_out_ep>;
 		};
 	};
-- 
2.40.1