[PATCH v4 1/3] dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings

[Rob Herring]

On Tue, 29 Aug 2023 11:18:58 -0700, Tanmay Shah wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
> 
> Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> UltraScale+ platform. It will help in defining TCM in device-tree
> and make it's access platform agnostic and data-driven.
> 
> Tightly-coupled memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
> 
> The TCM resources(reg, reg-names and power-domain) are documented for
> each TCM in the R5 node. The reg and reg-names are made as required
> properties as we don't want to hardcode TCM addresses for future
> platforms and for zu+ legacy implementation will ensure that the
> old dts w/o reg/reg-names works and stable ABI is maintained.
> 
> It also extends the examples for TCM split and lockstep modes.
> 
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
> Signed-off-by: Tanmay Shah <tanmay.shah at amd.com>
> ---
> 
> Changes in v4:
>   - Use address-cells and size-cells value 2
>   - Modify ranges property as per new value of address-cells
>     and size-cells
>   - Modify child node "reg" property accordingly
>   - Remove previous ack for further review
> 
> 
>  .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 131 +++++++++++++++---
>  1 file changed, 113 insertions(+), 18 deletions(-)
> 

Acked-by: Rob Herring <robh at kernel.org>