[PATCH v8 1/2] arm64: dts: imx8mp: Add SAI, SDMA, AudioMIX
Adam Ford
aford173 at gmail.com
Tue Aug 29 19:44:15 PDT 2023
On Mon, May 8, 2023 at 6:42 AM Marek Vasut <marex at denx.de> wrote:
>
> Add all SAI nodes, SDMA2 and SDMA3 nodes, and AudioMIX node. This is
> needed to get audio operational on i.MX8MP .
>
> Acked-by: Peng Fan <peng.fan at nxp.com>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> Reviewed-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
> Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
> Tested-by: Adam Ford <aford173 at gmail.com> #imx8mp-beacon-kit
> Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> Tested-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
> Tested-by: Richard Leitner <richard.leitner at skidata.com>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Abel Vesa <abelvesa at kernel.org>
> Cc: Alexander Stein <alexander.stein at ew.tq-group.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Jacky Bai <ping.bai at nxp.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: Luca Ceresoli <luca.ceresoli at bootlin.com>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: Marco Felsch <m.felsch at pengutronix.de>
> Cc: Michael Turquette <mturquette at baylibre.com>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
> Cc: Richard Cochran <richardcochran at gmail.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: Stephen Boyd <sboyd at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-clk at vger.kernel.org
> ---
> V2: - Add AUDIO_AXI clock to audio gpc
> - Use IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT for SDMA2 IPG clock
> V3: Rename audio_ahb to plain ahb
> V4: - Add RB/TB from Luca
> - Rebase on next 20230223
> V5: - Add TB from Adam and Alexander
> - Replace blk-ctrl@ with clock-controller@
> - Specify sound-dai-cells in sai nodes
> V6: - Add RB from Fabio
> - Drop power-domain-names from audiomix block/clock controller
> - Move reg below compatible property
> - Move sound-dai-cells below reg property
> - Sort DT properties: compatible, regs, #cells, properties, status
> V7: - Move #clock-cells below reg property
> - Add AB from Peng
> - Add RB from Marco, sort the tags
> V8: Add TB from Richard
> ---
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 158 ++++++++++++++++++++++
> 1 file changed, 158 insertions(+)
>
<snip>
Marek,
I have a question about the clocking for eASRC and PDM.
> +
> + audio_blk_ctrl: clock-controller at 30e20000 {
> + compatible = "fsl,imx8mp-audio-blk-ctrl";
> + reg = <0x30e20000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
> + <&clk IMX8MP_CLK_SAI1>,
> + <&clk IMX8MP_CLK_SAI2>,
> + <&clk IMX8MP_CLK_SAI3>,
> + <&clk IMX8MP_CLK_SAI5>,
> + <&clk IMX8MP_CLK_SAI6>,
> + <&clk IMX8MP_CLK_SAI7>;
> + clock-names = "ahb",
> + "sai1", "sai2", "sai3",
> + "sai5", "sai6", "sai7";
> + power-domains = <&pgc_audio>;
> + };
> + };
> +
I am trying to plumb in the micfil driver with a PDM microphone on a
Plus. I have SAI3 and SAI5 audio working, but if I try to use the
micfil, the PDM clock doesn't get turned on, and the micfil doesn't
appear to see anything coming in. I was curious why the
audio_blk_ctrl has clock entries for IMX8MP_CLK_SAIx, but there isn't
one for the PDM nor the ASRC clocks. I added the MICFIL noted to the
8mp in a previous patch [1], and I am trying to customize the MICFIL
node as follows:
&micfil {
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
assigned-clocks = <&clk IMX8MP_CLK_PDM>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
assigned-clock-rates = <196608000>;
status = "okay";
};
I also noticed in the down-stream kernel, the pdm_ipg_clk and
pdm_root_clk are shared gates with separate parents.
The PDM tree of the down-stream kernel looks like this:
audio_pll1_ref_sel 0 0 0 24000000
0 0 50000 Y
audio_pll1 0 0 0 393216000
0 0 50000 Y
audio_pll1_bypass 0 0 0 393216000
0 0 50000 Y
audio_pll1_out 0 0 0 393216000
0 0 50000 N
pdm 0 0 0 196608000
0 0 50000 N
pdm_root 0 0 0 196608000
0 0 50000 N
pdm_sel 0 0 0 196608000
0 0 50000 Y
pdm_root_clk 0 0 0
196608000 0 0 50000 N
The PDM tree of the mainline looks like this:
audio_pll1_ref_sel 0 0 0 24000000
0 0 50000 Y
audio_pll1 0 0 0 393216000
0 0 50000 Y
audio_pll1_bypass 0 0 0 393216000
0 0 50000 Y
audio_pll1_out 0 0 0 393216000
0 0 50000 N
pdm 0 0 0 196608000
0 0 50000 N
pdm_root 0 0 0 196608000
0 0 50000 N
pdm_sel 0 0 0 196608000
0 0 50000 Y
It seems like the "pdm_root_clk" generated by the shared audo-blk
down-sream driver is missing from the mainline. I looked up the clock
I referenced when I attempted to enable the miffil, but
'IMX8MP_CLK_AUDIOMIX_PDM_ROOT doesn't appear to be configured in
either clk-imx8mp.c or clk-imx8mp-audiomix.c. Maybe it's obscured by
the macros, but it seems like the pdm_sel should somehow have an
additional variable for the shared clock and an additional clock like
pdm_root_clk assigned with it.
I have similar configurations for Mini and Nano, and both of them are
able to record audio, so I think there might be a clock issue
somewhere related to the audiomix driver, and not a misconfiguration
of the sound-card or the micfil itself.
thanks for any suggestions,
adam
[1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/20230827023155.467807-3-aford173@gmail.com/
More information about the linux-arm-kernel
mailing list