[PATCH v10 2/4] arm64: dts: qcom: ipq5332: Add USB related nodes

[Varadarajan Narayanan]

Add USB phy and controller nodes.

Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
---
v10:
	usb at 8a00000 -> usb at 8af8800
	"make W=1 ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed
v9:
	usb2 at 8a00000 -> usb at 8a00000
	"make ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed
v6:
	Remove clock names
	Move the nodes to address sorted location
v5:
	Use generic phy instead of usb-phy
	'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed
	'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
v4:
	Change node name
	Remove blank line
	'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
v1:
	Rename phy node
	Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
	Remove 'qscratch' from phy node
	Fix alignment and upper-case hex no.s
	Add clock definition for the phy
	Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
	in dwc3/core.c takes the frequency from ref clock and calculates fladj
	as appropriate.
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db..6593865 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -145,6 +145,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy at 7b000 {
+			compatible = "qcom,ipq5332-usb-hsphy";
+			reg = <0x0007b000 0x12c>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom: efuse at a4000 {
 			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x721>;
@@ -290,6 +303,48 @@
 			status = "disabled";
 		};
 
+		usb: usb at 8af8800 {
+			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb2_0_dwc: usb at 8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller at b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,	/* GICD */
-- 
2.7.4