[PATCH 05/11] dt-bindings: document the Qualcomm TEE Shared Memory Bridge

[Krzysztof Kozlowski]

On 28/08/2023 21:25, Bartosz Golaszewski wrote:
> Add Device Tree bindings for Qualcomm TEE Shared Memory Brige - a
> mechanism that allows sharing memory buffers between trustzone and the
> kernel.

Subject prefix:
dt-bindings: firmware:



> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> ---
>  .../bindings/firmware/qcom,shm-bridge.yaml    | 36 +++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/firmware/qcom,shm-bridge.yaml
> 
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,shm-bridge.yaml b/Documentation/devicetree/bindings/firmware/qcom,shm-bridge.yaml
> new file mode 100644
> index 000000000000..f660962b7b86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/qcom,shm-bridge.yaml
> @@ -0,0 +1,36 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/firmware/qcom,shm-bridge.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QCOM Shared Memory Bridge
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  Qualcomm TEE Shared Memory Bridge allows sharing limited areas of kernel's
> +  virtual memory with the trustzone in order to avoid mapping the entire RAM.
> +
> +maintainers:
> +  - Bjorn Andersson <andersson at kernel.org>
> +  - Konrad Dybcio <konrad.dybcio at linaro.org>
> +  - Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,shm-bridge-sa8775p
> +          - qcom,shm-bridge-sm8150
> +          - qcom,shm-bridge-sm8450
> +      - const: qcom,shm-bridge
> +

Looks quite empty... Why this cannot be part of qcom,scm? IOW, why do
you need new binding if you do not have any resources here and the block
is essentially feature of qcom,scm firmware?

> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    firmware {
> +         compatible = "qcom,shm-bridge-sa8775p", "qcom,shm-bridge";

Use 4 spaces for example indentation.

> +    };

Best regards,
Krzysztof