[PATCH V2 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node

[Dmitry Baryshkov]

On Fri, 25 Aug 2023 at 12:15, Devi Priya <quic_devipriy at quicinc.com> wrote:
>
> Add a node for the nss clock controller found on ipq9574 based devices.
>
> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> ---
>  Changes in V2:
>         - Dropped the fixed clock node gcc_gpll0_out_aux and added
>           support for the same in gcc driver
>         - Updated the node name to clock-controller at 39b00000
>         - Added clock-names to retrieve the nssnoc clocks and add them
>           to the list of pm clocks in nss driver
>
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 48 +++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 51aba071c1eb..903311547e96 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -10,6 +10,8 @@
>  #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
> +#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
> +#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -18,6 +20,24 @@ / {
>         #size-cells = <2>;
>
>         clocks {
> +               bias_pll_cc_clk: bias-pll-cc-clk {
> +                       compatible = "fixed-clock";
> +                       clock-frequency = <1200000000>;
> +                       #clock-cells = <0>;
> +               };
> +
> +               bias_pll_nss_noc_clk: bias-pll-nss-noc-clk {
> +                       compatible = "fixed-clock";
> +                       clock-frequency = <461500000>;
> +                       #clock-cells = <0>;
> +               };
> +
> +               bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
> +                       compatible = "fixed-clock";
> +                       clock-frequency = <353000000>;
> +                       #clock-cells = <0>;
> +               };

Which part provides these clocks?

> +
>                 sleep_clk: sleep-clk {
>                         compatible = "fixed-clock";
>                         #clock-cells = <0>;
> @@ -722,6 +742,34 @@ frame at b128000 {
>                                 status = "disabled";
>                         };
>                 };
> +
> +               nsscc: clock-controller at 39b00000 {
> +                       compatible = "qcom,ipq9574-nsscc";
> +                       reg = <0x39b00000 0x80000>;
> +                       clocks = <&gcc GCC_NSSNOC_NSSCC_CLK>,
> +                                <&gcc GCC_NSSNOC_SNOC_CLK>,
> +                                <&gcc GCC_NSSNOC_SNOC_1_CLK>,
> +                                <&bias_pll_cc_clk>,
> +                                <&bias_pll_nss_noc_clk>,
> +                                <&bias_pll_ubi_nc_clk>,
> +                                <&gcc GPLL0_OUT_AUX>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <&xo_board_clk>;

If you move xo_board closer to the start of the list, it will be
slightly easier to review.

> +                       clock-names = "nssnoc_nsscc", "nssnoc_snoc", "nssnoc_snoc_1",
> +                                     "bias_pll_cc_clk", "bias_pll_nss_noc_clk",
> +                                     "bias_pll_ubi_nc_clk", "gpll0_out_aux", "uniphy0_nss_rx_clk",
> +                                     "uniphy0_nss_tx_clk", "uniphy1_nss_rx_clk",
> +                                     "uniphy1_nss_tx_clk", "uniphy2_nss_rx_clk",
> +                                     "uniphy2_nss_tx_clk", "xo_board_clk";

You are using clock indices. Please drop clock-names.

> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +               };
>         };
>
>         thermal-zones {
> --
> 2.34.1
>


-- 
With best wishes
Dmitry