[PATCH -next 1/4] iio: adc: at91_adc: Use devm_clk_get_enabled() helper function
Jinjie Ruan
ruanjinjie at huawei.com
Fri Aug 25 03:57:43 PDT 2023
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code.
Signed-off-by: Jinjie Ruan <ruanjinjie at huawei.com>
---
drivers/iio/adc/at91_adc.c | 38 ++++++++++----------------------------
1 file changed, 10 insertions(+), 28 deletions(-)
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index de6650f9c4b1..318e33ce22fb 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1087,32 +1087,20 @@ static int at91_adc_probe(struct platform_device *pdev)
return ret;
}
- st->clk = devm_clk_get(&pdev->dev, "adc_clk");
+ st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk");
if (IS_ERR(st->clk)) {
- dev_err(&pdev->dev, "Failed to get the clock.\n");
- ret = PTR_ERR(st->clk);
- goto error_free_irq;
- }
-
- ret = clk_prepare_enable(st->clk);
- if (ret) {
dev_err(&pdev->dev,
"Could not prepare or enable the clock.\n");
+ ret = PTR_ERR(st->clk);
goto error_free_irq;
}
- st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk");
+ st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk");
if (IS_ERR(st->adc_clk)) {
- dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
- ret = PTR_ERR(st->adc_clk);
- goto error_disable_clk;
- }
-
- ret = clk_prepare_enable(st->adc_clk);
- if (ret) {
dev_err(&pdev->dev,
"Could not prepare or enable the ADC clock.\n");
- goto error_disable_clk;
+ ret = PTR_ERR(st->adc_clk);
+ goto error_free_irq;
}
/*
@@ -1132,7 +1120,7 @@ static int at91_adc_probe(struct platform_device *pdev)
if (!st->startup_time) {
dev_err(&pdev->dev, "No startup time available.\n");
ret = -EINVAL;
- goto error_disable_adc_clk;
+ goto error_free_irq;
}
ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz);
@@ -1160,7 +1148,7 @@ static int at91_adc_probe(struct platform_device *pdev)
ret = at91_adc_channel_init(idev);
if (ret < 0) {
dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
- goto error_disable_adc_clk;
+ goto error_free_irq;
}
init_waitqueue_head(&st->wq_data_avail);
@@ -1175,19 +1163,19 @@ static int at91_adc_probe(struct platform_device *pdev)
ret = at91_adc_buffer_init(idev);
if (ret < 0) {
dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
- goto error_disable_adc_clk;
+ goto error_free_irq;
}
ret = at91_adc_trigger_init(idev);
if (ret < 0) {
dev_err(&pdev->dev, "Couldn't setup the triggers.\n");
at91_adc_buffer_remove(idev);
- goto error_disable_adc_clk;
+ goto error_free_irq;
}
} else {
ret = at91_ts_register(idev, pdev);
if (ret)
- goto error_disable_adc_clk;
+ goto error_free_irq;
at91_ts_hw_init(idev, adc_clk_khz);
}
@@ -1207,10 +1195,6 @@ static int at91_adc_probe(struct platform_device *pdev)
} else {
at91_ts_unregister(st);
}
-error_disable_adc_clk:
- clk_disable_unprepare(st->adc_clk);
-error_disable_clk:
- clk_disable_unprepare(st->clk);
error_free_irq:
free_irq(st->irq, idev);
return ret;
@@ -1228,8 +1212,6 @@ static int at91_adc_remove(struct platform_device *pdev)
} else {
at91_ts_unregister(st);
}
- clk_disable_unprepare(st->adc_clk);
- clk_disable_unprepare(st->clk);
free_irq(st->irq, idev);
return 0;
--
2.34.1
More information about the linux-arm-kernel
mailing list