[PATCH v5 07/11] firmware: imx: init-fw api exchange on imx93

[Krzysztof Kozlowski]

On 23/08/2023 09:33, Pankaj Gupta wrote:
> On imx93 platforms, exchange init-fw message with enclave's firmware
> is to be done.
> 
> Signed-off-by: Pankaj Gupta <pankaj.gupta at nxp.com>
> ---
>  drivers/firmware/imx/Makefile           |  2 +-
>  drivers/firmware/imx/ele_fw_api.c       | 56 +++++++++++++++++++++++++
>  drivers/firmware/imx/se_fw.c            | 11 +++++
>  include/linux/firmware/imx/ele_fw_api.h | 19 +++++++++
>  4 files changed, 87 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/firmware/imx/ele_fw_api.c
>  create mode 100644 include/linux/firmware/imx/ele_fw_api.h
> 
> diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
> index eab3f03e2e5e..bc6ed5514a19 100644
> --- a/drivers/firmware/imx/Makefile
> +++ b/drivers/firmware/imx/Makefile
> @@ -2,5 +2,5 @@
>  obj-$(CONFIG_IMX_DSP)		+= imx-dsp.o
>  obj-$(CONFIG_IMX_SCU)		+= imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
>  obj-$(CONFIG_IMX_SCU_PD)	+= scu-pd.o
> -sec_enclave-objs		= se_fw.o ele_common.o ele_base_msg.o
> +sec_enclave-objs		= se_fw.o ele_common.o ele_base_msg.o ele_fw_api.o
>  obj-${CONFIG_IMX_SEC_ENCLAVE}	+= sec_enclave.o
> diff --git a/drivers/firmware/imx/ele_fw_api.c b/drivers/firmware/imx/ele_fw_api.c
> new file mode 100644
> index 000000000000..1df1fbcb6d9e
> --- /dev/null
> +++ b/drivers/firmware/imx/ele_fw_api.c
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2023 NXP
> + */
> +
> +#include <linux/dma-mapping.h>
> +#include <linux/firmware/imx/ele_fw_api.h>
> +
> +#include "ele_common.h"
> +
> +/* Fill a command message header with a given command ID and length in bytes. */
> +static int plat_fill_cmd_msg_hdr(struct ele_mu_priv *priv,
> +				 struct mu_hdr *hdr,
> +				 uint8_t cmd, uint32_t len)
> +{
> +	int err = 0;
> +
> +	hdr->tag = priv->cmd_tag;
> +	hdr->ver = MESSAGING_VERSION_7;
> +	hdr->command = cmd;
> +	hdr->size = (uint8_t)(len / sizeof(uint32_t));
> +
> +	return err;
> +}
> +
> +int ele_init_fw(struct device *dev)
> +{
> +	struct ele_mu_priv *priv = dev_get_drvdata(dev);
> +	int ret;
> +	unsigned int tag, command, size, ver, status;
> +
> +	ret = plat_fill_cmd_msg_hdr(priv,
> +				    (struct mu_hdr *)&priv->tx_msg.header,
> +				    ELE_INIT_FW_REQ, 4);

This is some weird code. Why do you store TX and RX messages in state
container? This should be local to the function.

> +	if (ret)
> +		return ret;
> +
> +	ret = imx_ele_msg_send_rcv(priv);
> +	if (ret < 0)
> +		return ret;
> +
> +	tag = MSG_TAG(priv->rx_msg.header);
> +	command = MSG_COMMAND(priv->rx_msg.header);
> +	size = MSG_SIZE(priv->rx_msg.header);
> +	ver = MSG_VER(priv->rx_msg.header);
> +	status = RES_STATUS(priv->rx_msg.data[0]);
> +
> +	if (tag == priv->rsp_tag
> +		&& command == ELE_INIT_FW_REQ
> +		&& size == ELE_INIT_FW_RSP_SZ
> +		&& ver == MESSAGING_VERSION_7
> +		&& status == priv->success_tag)
> +		return 0;

Your coding style here and in all other places like this is unreadable.
Fix alignment.

> +
> +	return -EINVAL;
> +}
> diff --git a/drivers/firmware/imx/se_fw.c b/drivers/firmware/imx/se_fw.c
> index 2c97b2adf18b..88300c41d62b 100644
> --- a/drivers/firmware/imx/se_fw.c
> +++ b/drivers/firmware/imx/se_fw.c
> @@ -8,6 +8,7 @@
>  #include <linux/dev_printk.h>
>  #include <linux/errno.h>
>  #include <linux/export.h>
> +#include <linux/firmware/imx/ele_fw_api.h>
>  #include <linux/firmware/imx/ele_base_msg.h>
>  #include <linux/firmware/imx/ele_mu_ioctl.h>
>  #include <linux/genalloc.h>
> @@ -41,6 +42,7 @@ struct imx_info {
>  	uint8_t *se_name;
>  	uint8_t *pool_name;
>  	bool reserved_dma_ranges;
> +	bool init_fw;
>  };
>  
>  static LIST_HEAD(priv_data_list);
> @@ -55,6 +57,7 @@ static const struct imx_info imx8ulp_info = {
>  	.se_name = "ele",
>  	.pool_name = "sram-pool",
>  	.reserved_dma_ranges = true,
> +	.init_fw = false,
>  };
>  
>  static const struct imx_info imx93_info = {
> @@ -67,6 +70,7 @@ static const struct imx_info imx93_info = {
>  	.se_name = "ele",
>  	.pool_name = NULL,
>  	.reserved_dma_ranges = true,
> +	.init_fw = true,
>  };
>  
>  static const struct of_device_id se_fw_match[] = {
> @@ -1120,6 +1124,13 @@ static int se_fw_probe(struct platform_device *pdev)
>  		priv->flags |= RESERVED_DMA_POOL;
>  	}
>  
> +	if (info->init_fw) {
> +		/* start initializing ele fw */
> +		ret = ele_init_fw(dev);
> +		if (ret)
> +			dev_err(dev, "Failed to initialize ele fw.\n");
> +	}
> +
>  	if (info->socdev) {
>  		ret = imx_soc_device_register(dev, info);
>  		if (ret) {
> diff --git a/include/linux/firmware/imx/ele_fw_api.h b/include/linux/firmware/imx/ele_fw_api.h
> new file mode 100644
> index 000000000000..36c3f743cb38
> --- /dev/null
> +++ b/include/linux/firmware/imx/ele_fw_api.h

There is no need this to be Linux-wide. Keep it next to the driver.


Best regards,
Krzysztof