[PATCH] arm: dts: bcm2711: Describe Ethernet LEDs

[Stefan Wahren]

Hi Florian,

Am 21.08.23 um 21:27 schrieb Florian Fainelli:
> Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well
> as the Raspberry Pi 4 CM board.
>
> Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
> ---
>   arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 18 ++++++++++++++++++
>   .../arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi | 18 ++++++++++++++++++
>   2 files changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
> index d5f8823230db..41db78cb0836 100644
> --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
> @@ -5,6 +5,7 @@
>   #include "bcm283x-rpi-led-deprecated.dtsi"
>   #include "bcm283x-rpi-usb-peripheral.dtsi"
>   #include "bcm283x-rpi-wifi-bt.dtsi"
> +#include <dt-bindings/leds/common.h>
>
>   / {
>   	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
> @@ -197,6 +198,23 @@ &genet_mdio {
>   	phy1: ethernet-phy at 1 {
>   		/* No PHY interrupt */
>   		reg = <0x1>;
> +
> +		leds {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			leds at 0 {
> +				color = <LED_COLOR_ID_GREEN>;
> +				default-state = "keep";
> +				reg = <0>;
> +			};
> +
> +			leds at 1 {
> +				color = <LED_COLOR_ID_AMBER>;
> +				default-state = "keep";
> +				reg = <1>;
> +			};
> +		};

the Raspberry Pi 400 Ethernet Jack doesn't have LEDs, but the
bcm2711-rpi-400.dts does include bcm2711-rpi-4.dtb. So this complete new
node must be deleted there.

Best regards

>   	};
>   };