[PATCH v14 0/6] drm/imx: Introduce i.MX8qm/qxp DPU DRM

Ying Liu victor.liu at nxp.com
Tue Aug 22 01:23:33 PDT 2023


On Tuesday, August 22, 2023 4:06 PM Maxime <mripard at kernel.org> wrote:
> 
> Hi,

Hi,

> 
> On Tue, Aug 22, 2023 at 05:36:14AM +0000, Ying Liu wrote:
> > Hi,
> >
> > > On Friday, January 6, 2023 1:50 PM Ying Liu wrote:
> > >
> > > Hi,
> > >
> > >
> > > This is the v14 series to introduce i.MX8qm/qxp Display Processing
> Unit(DPU)
> > > DRM support.
> > >
> > > DPU is comprised of a blit engine for 2D graphics, a display controller
> > > and a command sequencer.  Outside of DPU, optional prefetch engines
> can
> > > fetch data from memory prior to some DPU fetchunits of blit engine and
> > > display controller.  The pre-fetchers support linear formats and Vivante
> > > GPU tile formats.
> > >
> > > Reference manual can be found at:
> > > https://www.nxp.com/webapp/Download?colCode=IMX8DQXPRM
> > >
> > >
> > > This patch set adds kernel modesetting support for the display controller
> part.
> > > It supports two CRTCs per display controller, several planes, prefetch
> > > engines and some properties of CRTC and plane.  Currently, the registers
> of
> > > the controller is accessed without command sequencer involved, instead
> just
> > > by
> > > using CPU.  DRM connectors would be created from the DPU KMS driver.
> > >
> > >
> > > Patch 1 ~ 3 add dt-bindings for DPU and prefetch engines.
> > > Patch 4 is a minor improvement of a macro to suppress warning as the
> KMS
> > > driver
> > > uses it.
> > > Patch 5 introduces the DPU DRM support.
> > > Patch 6 updates MAINTAINERS.
> > >
> > > Welcome comments, thanks.
> > >
> > > v13->v14:
> > > * Rebase the patch series to the latest drm-misc-next branch(v6.1-rc6
> based).
> > > * Include drm_fbdev_generic.h in dpu_drv.c due to the rebase.
> > > * Fix dpu drm driver suspend/resume by properly get drm device through
> > >   dev_get_drvdata().
> > > * Use pm_ptr() macro for dpu core driver PM operations.
> > > * Use pm_sleep_ptr() macro for dpu drm driver PM operations.
> > > * Use DEFINE_SIMPLE_DEV_PM_OPS() macro to define dpu drm driver
> PM
> > > operations,
> > >   instead of SIMPLE_DEV_PM_OPS().
> > > * Update year of Copyright.
> > > * Add SoC series name 'i.MX8'/'IMX8'/'imx8' to dpu driver module
> decription,
> > >   Kconfig name, dpu driver names and dpu driver object name.
> > >
> > > v12->v13:
> > > * Drop 'drm->irq_enabled = true;' from patch 5/6 to fix a potential build
> > >   break reported by 'kernel test robot <lkp at intel.com>'.  drm-
> >irq_enabled
> > >   should not be used by imx-dpu drm as it is only used by legacy drivers
> > >   with userspace modesetting.
> > >
> > > v11->v12:
> > > * Rebase the series upon v6.1-rc1.
> > > * Minor update on Kconfigs, struct names and macro names for patch 5/6
> > >   due to the rebase.
> > >
> > > v10->v11:
> > > * Rebase the series upon v6.0-rc1.
> > > * Include drm_blend.h and drm_framebuffer.h in dpu-kms.c and dpu-
> > > plane.c
> > >   to fix build errors due to the rebase.
> > > * Fix a checkpatch warning for dpu-crtc.c.
> > > * Properly use dev_err_probe() to return it's return value directly where
> > >   possible.
> > >
> > > v9->v10:
> > > * Rebase the series upon v5.18-rc1.
> > > * Make 'checkpatch.pl --strict' happier for patch 5/6.
> > > * Add Rob's R-b tag on patch 3/6.
> > > * Add Laurentiu's R-b tag on patch 5/6.
> > > * Add Laurentiu's A-b tag on patch 6/6.
> > >
> > > v8->v9:
> > > * Use drm_atomic_get_new_plane_state() in dpu_plane_atomic_update()
> > > for
> > >   patch 5/6. (Laurentiu)
> > > * Drop getting DPU DT alias ID for patch 5/6, as it is unused.
> > > * Reference 'interrupts-extended' schema instead of 'interrupts' for patch
> > > 3/6
> > >   to require an additional DPR interrupt(r_rtram_stall) because the
> reference
> > >   manual does mention it, though the driver doesn't get/use it for now.
> > >   Reference 'interrupt-names' schema to define the two DPR interrupt
> names
> > > -
> > >   'dpr_wrap' and 'r_rtram_stall'.  Accordingly, patch 5/6 gets the
> 'dpr_wrap'
> > >   interrupt by name.
> > > * Drop Rob's R-b tag on patch 3/6, as review is needed.
> > >
> > > v7->v8:
> > > * Rebase this series up onto the latest drm-misc-next branch, due to DRM
> > > plane
> > >   helper functions API change(atomic_check and atomic_update) from
> DRM
> > > atomic
> > >   core.  So, dpu_plane_atomic_check() and dpu_plane_atomic_update()
> are
> > > updated
> > >   accordingly in patch 5/6.  Also, rename plane->state variables and
> relevant
> > >   DPU plane state variables in those two functions to reflect they are new
> > >   states, like the patch 'drm: Rename plane->state variables in atomic
> update
> > >   and disable' recently landed in drm-misc-next.
> > > * Replace drm_gem_fb_prepare_fb() with
> > > drm_gem_plane_helper_prepare_fb() in
> > >   patch 5/6, due to DRM core API change.
> > > * Improve DPR burst length for GPU standard tile and 32bpp GPU super
> tile in
> > >   patch 5/6 to align with the latest version of internal HW documention.
> > >
> > > v6->v7:
> > > * Fix return value of dpu_get_irqs() if platform_get_irq() fails. (Laurentiu)
> > > * Use the function array dpu_irq_handler[] to store individual DPU irq
> > > handlers.
> > >   (Laurentiu)
> > > * Call get/put() hooks directly to get/put DPU fetchunits for DPU plane
> groups.
> > >   (Laurentiu)
> > > * Shorten the names of individual DPU irq handlers by using DPU unit
> abbrev
> > >   names to make writing dpu_irq_handler[] easier.
> > > * Add Rob's R-b tag back on DPU dt-binding patch as change in v6 was
> > > reviewed.
> > >
> > > v5->v6:
> > > * Use graph schema in the DPU dt-binding.
> > > * Do not use macros where possible in the DPU DRM driver. (Laurentiu)
> > > * Break dpu_plane_atomic_check() into some smaller functions.
> (Laurentiu)
> > > * Address some minor comments from Laurentiu on the DPU DRM driver.
> > > * Add dpu_crtc_err() helper marco in the DPU DRM driver to tell dmesg
> > >   which CRTC generates error.
> > > * Drop calling dev_set_drvdata() from dpu_drm_bind/unbind() in the
> DPU
> > > DRM
> > >   driver as it is done in dpu_drm_probe().
> > > * Some trivial tweaks.
> > >
> > > v4->v5:
> > > * Rebase up onto the latest drm-misc-next branch and remove the hook
> to
> > >   drm_atomic_helper_legacy_gamma_set() from patch 5/6, because it
> was
> > > dropped
> > >   by the newly landed commit 'drm: automatic legacy gamma support'.
> > > * Remove a redundant blank line from dpu_plane_atomic_update() in
> patch
> > > 5/6.
> > >
> > > v3->v4:
> > > * Improve compatible properties in DPU and prefetch engines' dt
> bindings
> > >   by using enum instead of oneOf+const.
> > > * Add Rob's R-b tags on dt binding patches(patch 1/6, 2/6 and 3/6).
> > > * Add Daniel's A-b tag on patch 4/6.
> > >
> > > v2->v3:
> > > * Fix DPU DRM driver build warnings which are
> > >   Reported-by: kernel test robot <lkp at intel.com>.
> > > * Drop DPU DRM driver build dependency on IMX_SCU, as dummy SCU
> > > functions have
> > >   been added in header files by the patch 'firmware: imx: add dummy
> > > functions'
> > >   which has landed in linux-next/master branch.
> > > * Add a missing blank line in include/drm/drm_atomic.h.
> > >
> > > v1->v2:
> > > * Test this patch set also with i.MX8qm LVDS displays.
> > > * Drop the device tree patches because we'll use new dt binding way to
> > >   support i.MX8qm/qxp clocks.  This depends on a not-yet-landed patch
> set
> > >   to do basic conversions for the platforms.
> > > * Fix dt binding yamllint warnings.
> > > * Require bypass0 and bypass1 clocks for both i.MX8qxp and i.MX8qm in
> > > DPU's
> > >   dt binding documentation.
> > > * Use new dt binding way to add clocks in the dt binding examples.
> > > * Address several comments from Laurentiu on the DPU DRM patch.
> > >
> > >
> > > Liu Ying (6):
> > >   dt-bindings: display: imx: Add i.MX8qxp/qm DPU binding
> > >   dt-bindings: display: imx: Add i.MX8qxp/qm PRG binding
> > >   dt-bindings: display: imx: Add i.MX8qxp/qm DPR channel binding
> > >   drm/atomic: Avoid unused-but-set-variable warning on
> > >     for_each_old_plane_in_state
> > >   drm/imx: Introduce i.MX8qm/qxp DPU DRM
> > >   MAINTAINERS: add maintainer for i.MX8qxp DPU DRM driver
> > >
> > >  .../display/imx/fsl,imx8qxp-dprc.yaml         |  100 ++
> > >  .../bindings/display/imx/fsl,imx8qxp-dpu.yaml |  387 ++++++
> > >  .../bindings/display/imx/fsl,imx8qxp-prg.yaml |   60 +
> > >  MAINTAINERS                                   |    9 +
> > >  drivers/gpu/drm/imx/Kconfig                   |    1 +
> > >  drivers/gpu/drm/imx/Makefile                  |    1 +
> > >  drivers/gpu/drm/imx/dpu/Kconfig               |    9 +
> > >  drivers/gpu/drm/imx/dpu/Makefile              |   10 +
> > >  drivers/gpu/drm/imx/dpu/dpu-constframe.c      |  171 +++
> > >  drivers/gpu/drm/imx/dpu/dpu-core.c            | 1044 +++++++++++++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-crtc.c            |  969 +++++++++++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-crtc.h            |   72 ++
> > >  drivers/gpu/drm/imx/dpu/dpu-disengcfg.c       |  117 ++
> > >  drivers/gpu/drm/imx/dpu/dpu-dprc.c            |  715 +++++++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-dprc.h            |   40 +
> > >  drivers/gpu/drm/imx/dpu/dpu-drv.c             |  294 +++++
> > >  drivers/gpu/drm/imx/dpu/dpu-drv.h             |   28 +
> > >  drivers/gpu/drm/imx/dpu/dpu-extdst.c          |  299 +++++
> > >  drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c     |  292 +++++
> > >  drivers/gpu/drm/imx/dpu/dpu-fetcheco.c        |  224 ++++
> > >  drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c      |  152 +++
> > >  drivers/gpu/drm/imx/dpu/dpu-fetchunit.c       |  610 ++++++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-fetchunit.h       |  195 +++
> > >  drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c       |  248 ++++
> > >  drivers/gpu/drm/imx/dpu/dpu-framegen.c        |  395 +++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-gammacor.c        |  223 ++++
> > >  drivers/gpu/drm/imx/dpu/dpu-hscaler.c         |  275 +++++
> > >  drivers/gpu/drm/imx/dpu/dpu-kms.c             |  542 +++++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-kms.h             |   23 +
> > >  drivers/gpu/drm/imx/dpu/dpu-layerblend.c      |  348 ++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-plane.c           |  804 +++++++++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-plane.h           |   59 +
> > >  drivers/gpu/drm/imx/dpu/dpu-prg.c             |  433 +++++++
> > >  drivers/gpu/drm/imx/dpu/dpu-prg.h             |   45 +
> > >  drivers/gpu/drm/imx/dpu/dpu-prv.h             |  231 ++++
> > >  drivers/gpu/drm/imx/dpu/dpu-tcon.c            |  250 ++++
> > >  drivers/gpu/drm/imx/dpu/dpu-vscaler.c         |  308 +++++
> > >  drivers/gpu/drm/imx/dpu/dpu.h                 |  385 ++++++
> > >  include/drm/drm_atomic.h                      |    5 +-
> > >  39 files changed, 10372 insertions(+), 1 deletion(-)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dprc.yaml
> > >  create mode 100644
> > > Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
> > >  create mode 100644
> > > Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-prg.yaml
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/Kconfig
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/Makefile
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-constframe.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-core.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-disengcfg.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-extdst.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetcheco.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-framegen.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-gammacor.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-hscaler.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-layerblend.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prv.h
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-tcon.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu-vscaler.c
> > >  create mode 100644 drivers/gpu/drm/imx/dpu/dpu.h
> > >
> > > --
> > > 2.37.1
> >
> > This patch series has been submitted for a quite long period of time.
> >
> > Anything I can do to have it landed ?
> 
> I'm not sure why it fell through the cracks, but given that it's more
> than 6 monthes old, please rebase and resend it.

Ok, will do that, though "git am" still runs successfully for this series
against the latest drm-misc-next.

Regards,
Liu Ying

> 
> Maxime



More information about the linux-arm-kernel mailing list