[PATCH v5 08/12] KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
Shaoqin Huang
shahuang at redhat.com
Mon Aug 21 20:26:23 PDT 2023
Hi Raghavendra,
On 8/22/23 07:28, Raghavendra Rao Ananta wrote:
> Hi Shaoqin,
>
> On Mon, Aug 21, 2023 at 5:12 AM Shaoqin Huang <shahuang at redhat.com> wrote:
>>
>> Hi Raghavendra,
>>
>> On 8/17/23 08:30, Raghavendra Rao Ananta wrote:
>>> From: Reiji Watanabe <reijiw at google.com>
>>>
>>> KVM does not yet support userspace modifying PMCR_EL0.N (With
>>> the previous patch, KVM ignores what is written by upserspace).
>>> Add support userspace limiting PMCR_EL0.N.
>>>
>>> Disallow userspace to set PMCR_EL0.N to a value that is greater
>>> than the host value (KVM_SET_ONE_REG will fail), as KVM doesn't
>>> support more event counters than the host HW implements.
>>> Although this is an ABI change, this change only affects
>>> userspace setting PMCR_EL0.N to a larger value than the host.
>>> As accesses to unadvertised event counters indices is CONSTRAINED
>>> UNPREDICTABLE behavior, and PMCR_EL0.N was reset to the host value
>>> on every vCPU reset before this series, I can't think of any
>>> use case where a user space would do that.
>>>
>>> Also, ignore writes to read-only bits that are cleared on vCPU reset,
>>> and RES{0,1} bits (including writable bits that KVM doesn't support
>>> yet), as those bits shouldn't be modified (at least with
>>> the current KVM).
>>>
>>> Signed-off-by: Reiji Watanabe <reijiw at google.com>
>>> Signed-off-by: Raghavendra Rao Ananta <rananta at google.com>
>>> ---
>>> arch/arm64/include/asm/kvm_host.h | 3 ++
>>> arch/arm64/kvm/pmu-emul.c | 1 +
>>> arch/arm64/kvm/sys_regs.c | 49 +++++++++++++++++++++++++++++--
>>> 3 files changed, 51 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
>>> index 0f2dbbe8f6a7e..c15ec365283d1 100644
>>> --- a/arch/arm64/include/asm/kvm_host.h
>>> +++ b/arch/arm64/include/asm/kvm_host.h
>>> @@ -259,6 +259,9 @@ struct kvm_arch {
>>> /* PMCR_EL0.N value for the guest */
>>> u8 pmcr_n;
>>>
>>> + /* Limit value of PMCR_EL0.N for the guest */
>>> + u8 pmcr_n_limit;
>>> +
>>> /* Hypercall features firmware registers' descriptor */
>>> struct kvm_smccc_features smccc_feat;
>>> struct maple_tree smccc_filter;
>>> diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
>>> index ce7de6bbdc967..39ad56a71ad20 100644
>>> --- a/arch/arm64/kvm/pmu-emul.c
>>> +++ b/arch/arm64/kvm/pmu-emul.c
>>> @@ -896,6 +896,7 @@ int kvm_arm_set_vm_pmu(struct kvm *kvm, struct arm_pmu *arm_pmu)
>>> * while the latter does not.
>>> */
>>> kvm->arch.pmcr_n = arm_pmu->num_events - 1;
>>> + kvm->arch.pmcr_n_limit = arm_pmu->num_events - 1;
>>>
>>> return 0;
>>> }
>>> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
>>> index 2075901356c5b..c01d62afa7db4 100644
>>> --- a/arch/arm64/kvm/sys_regs.c
>>> +++ b/arch/arm64/kvm/sys_regs.c
>>> @@ -1086,6 +1086,51 @@ static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
>>> return 0;
>>> }
>>>
>>> +static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
>>> + u64 val)
>>> +{
>>> + struct kvm *kvm = vcpu->kvm;
>>> + u64 new_n, mutable_mask;
>>> + int ret = 0;
>>> +
>>> + new_n = FIELD_GET(ARMV8_PMU_PMCR_N, val);
>>> +
>>> + mutex_lock(&kvm->arch.config_lock);
>>> + if (unlikely(new_n != kvm->arch.pmcr_n)) {
>>> + /*
>>> + * The vCPU can't have more counters than the PMU
>>> + * hardware implements.
>>> + */
>>> + if (new_n <= kvm->arch.pmcr_n_limit)
>>> + kvm->arch.pmcr_n = new_n;
>>> + else
>>> + ret = -EINVAL;
>>> + }
>>
>> Since we have set the default value of pmcr_n, if we want to set a new
>> pmcr_n, shouldn't it be a different value?
>>
>> So how about change the checking to:
>>
>> if (likely(new_n <= kvm->arch.pmcr_n_limit)
>> kvm->arch.pmcr_n = new_n;
>> else
>> ret = -EINVAL;
>>
>> what do you think?
>>
> Sorry, I guess I didn't fully understand your suggestion. Are you
> saying that it's 'likely' that userspace would configure the correct
> value?
>
It depends on how userspace use this api to limit the number of pmcr. I
think what you mean in the code is that userspace need to set every
vcpu's pmcr to the same value, so the `unlikely` here is right, only one
vcpu can change the kvm->arch.pmcr.n, it saves the cpu cycles.
What suggest above might be wrong. Since I think when userspace want to
limit the number of pmcr, it may just set the new_n on one vcpu, since
the kvm->arch.pmcr_n is a VM-local value, every vcpu can see it, so it's
`likely` the (new_n <= kvm->arch.pmcr_n_limit), it can decrease one
checking statement.
Thanks,
Shaoqin
>>> + mutex_unlock(&kvm->arch.config_lock);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /*
>>> + * Ignore writes to RES0 bits, read only bits that are cleared on
>>> + * vCPU reset, and writable bits that KVM doesn't support yet.
>>> + * (i.e. only PMCR.N and bits [7:0] are mutable from userspace)
>>> + * The LP bit is RES0 when FEAT_PMUv3p5 is not supported on the vCPU.
>>> + * But, we leave the bit as it is here, as the vCPU's PMUver might
>>> + * be changed later (NOTE: the bit will be cleared on first vCPU run
>>> + * if necessary).
>>> + */
>>> + mutable_mask = (ARMV8_PMU_PMCR_MASK | ARMV8_PMU_PMCR_N);
>>> + val &= mutable_mask;
>>> + val |= (__vcpu_sys_reg(vcpu, r->reg) & ~mutable_mask);
>>> +
>>> + /* The LC bit is RES1 when AArch32 is not supported */
>>> + if (!kvm_supports_32bit_el0())
>>> + val |= ARMV8_PMU_PMCR_LC;
>>> +
>>> + __vcpu_sys_reg(vcpu, r->reg) = val;
>>> + return 0;
>>> +}
>>> +
>>> /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
>>> #define DBG_BCR_BVR_WCR_WVR_EL1(n) \
>>> { SYS_DESC(SYS_DBGBVRn_EL1(n)), \
>>> @@ -2147,8 +2192,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>>> { SYS_DESC(SYS_CTR_EL0), access_ctr },
>>> { SYS_DESC(SYS_SVCR), undef_access },
>>>
>>> - { PMU_SYS_REG(PMCR_EL0), .access = access_pmcr,
>>> - .reset = reset_pmcr, .reg = PMCR_EL0, .get_user = get_pmcr },
>>> + { PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr,
>>> + .reg = PMCR_EL0, .get_user = get_pmcr, .set_user = set_pmcr },
>>
>> A little confusing, since the PMU_SYS_REG() defines the default
>> visibility which is pmu_visibility can return REG_HIDDEN, the set_user
>> to pmcr will be blocked, how can it being set?
>>
>> Maybe I lose some details.
>>
> pmu_visibility() returns REG_HIDDEN only if userspace has not added
> support for PMUv3 via KVM_ARM_PREFERRED_TARGET ioctl. Else, it should
> return 0, and give access.
>
Got it. Thanks.
> Thank you.
> Raghavendra
>
>> Thanks,
>> Shaoqin
>>
>>> { PMU_SYS_REG(PMCNTENSET_EL0),
>>> .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
>>> { PMU_SYS_REG(PMCNTENCLR_EL0),
>>
>> --
>> Shaoqin
>>
>
--
Shaoqin
More information about the linux-arm-kernel
mailing list