[PATCH -next v3 11/12] mtd: spi-nor: nxp-spifi: Use helper function devm_clk_get_enabled()

Li Zetao lizetao1 at huawei.com
Sun Aug 20 20:17:36 PDT 2023


Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly, so drop
the label "dis_clks" and "dis_clk_reg".

Reviewed-by: Miquel Raynal <miquel.raynal at bootlin.com>
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
v2 -> v3: Modify the syntax error in the commit message.
v2: https://lore.kernel.org/all/20230818074642.308166-12-lizetao1@huawei.com/
v1 -> v2: Modify commit message.
v1: https://lore.kernel.org/all/20230817024509.3951629-12-lizetao1@huawei.com/

 drivers/mtd/spi-nor/controllers/nxp-spifi.c | 33 ++++-----------------
 1 file changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 337e83bf3362..5d8f47ab146f 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -394,30 +394,18 @@ static int nxp_spifi_probe(struct platform_device *pdev)
 	if (IS_ERR(spifi->flash_base))
 		return PTR_ERR(spifi->flash_base);
 
-	spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
+	spifi->clk_spifi = devm_clk_get_enabled(&pdev->dev, "spifi");
 	if (IS_ERR(spifi->clk_spifi)) {
-		dev_err(&pdev->dev, "spifi clock not found\n");
+		dev_err(&pdev->dev, "spifi clock not found or unable to enable\n");
 		return PTR_ERR(spifi->clk_spifi);
 	}
 
-	spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	spifi->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg");
 	if (IS_ERR(spifi->clk_reg)) {
-		dev_err(&pdev->dev, "reg clock not found\n");
+		dev_err(&pdev->dev, "reg clock not found or unable to enable\n");
 		return PTR_ERR(spifi->clk_reg);
 	}
 
-	ret = clk_prepare_enable(spifi->clk_reg);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable reg clock\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(spifi->clk_spifi);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable spifi clock\n");
-		goto dis_clk_reg;
-	}
-
 	spifi->dev = &pdev->dev;
 	platform_set_drvdata(pdev, spifi);
 
@@ -430,24 +418,17 @@ static int nxp_spifi_probe(struct platform_device *pdev)
 	flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
 	if (!flash_np) {
 		dev_err(&pdev->dev, "no SPI flash device to configure\n");
-		ret = -ENODEV;
-		goto dis_clks;
+		return -ENODEV;
 	}
 
 	ret = nxp_spifi_setup_flash(spifi, flash_np);
 	of_node_put(flash_np);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to setup flash chip\n");
-		goto dis_clks;
+		return ret;
 	}
 
 	return 0;
-
-dis_clks:
-	clk_disable_unprepare(spifi->clk_spifi);
-dis_clk_reg:
-	clk_disable_unprepare(spifi->clk_reg);
-	return ret;
 }
 
 static int nxp_spifi_remove(struct platform_device *pdev)
@@ -455,8 +436,6 @@ static int nxp_spifi_remove(struct platform_device *pdev)
 	struct nxp_spifi *spifi = platform_get_drvdata(pdev);
 
 	mtd_device_unregister(&spifi->nor.mtd);
-	clk_disable_unprepare(spifi->clk_spifi);
-	clk_disable_unprepare(spifi->clk_reg);
 
 	return 0;
 }
-- 
2.34.1




More information about the linux-arm-kernel mailing list