[PATCH v2 2/4] ARM: dts: am335x-pocketbeagle: remove dependency cycle

[Trevor Woerner]

Remove the self-referenceing "pinctrl-0" entry inside the pinmux clause.
This eliminates the set of boot messages (one for each referenced pin)
similar to the following:

        platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect at 44c00000/segment at 200000/target-module at 10000/scm at 0/pinmux at 800/pinmux_P2_17_gpio

Signed-off-by: Trevor Woerner <twoerner at gmail.com>
---
 arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
index 1c11245f6864..1e72b8382597 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
@@ -213,11 +213,6 @@ &am33xx_pinmux {
 	compatible = "pinconf-single";
 	pinctrl-names = "default";
 
-	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
-			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
-			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
-			&P2_17_gpio >;
-
 	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
 	P2_03_gpio: P2-03-gpio-pins {
 		pinctrl-single,pins = <
-- 
2.41.0.327.gaa9166bcc0ba