[PATCH 1/5] arm64: tegra: Add missing current-speed for SBSA UART

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

The SBSA UART device tree bindings require a current-speed property that
specifies the baud rate configured by the firmware. Add it on Jetson AGX
Orin and Jetson Orin Nano/NX.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 1 +
 arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi           | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 201a7a8a01cd..b4a6cee0b9e3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -121,6 +121,7 @@ serial at 3100000 {
 		};
 
 		serial at 31d0000 {
+			current-speed = <115200>;
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
index 45c4282b63e3..90490f429074 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
@@ -31,6 +31,7 @@ eeprom at 57 {
 		};
 
 		serial at 31d0000 {
+			current-speed = <115200>;
 			status = "okay";
 		};
 
-- 
2.41.0