[PATCH V4 4/8] genpd: imx: scu-pd: do not power off console if no_console_suspend

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Do not power off console if no_console_suspend, this will leave
the serial device's corresponding PM domain on during system suspend,
which is useful for debug system suspend.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/genpd/imx/scu-pd.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/genpd/imx/scu-pd.c b/drivers/genpd/imx/scu-pd.c
index 08583a10ac62..d69da79d3130 100644
--- a/drivers/genpd/imx/scu-pd.c
+++ b/drivers/genpd/imx/scu-pd.c
@@ -52,6 +52,7 @@
  */
 
 #include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/console.h>
 #include <linux/firmware/imx/sci.h>
 #include <linux/firmware/imx/svc/rm.h>
 #include <linux/io.h>
@@ -324,6 +325,10 @@ static int imx_sc_pd_power(struct generic_pm_domain *domain, bool power_on)
 	msg.resource = pd->rsrc;
 	msg.mode = power_on ? IMX_SC_PM_PW_MODE_ON : IMX_SC_PM_PW_MODE_LP;
 
+	/* keep uart console power on for no_console_suspend */
+	if (imx_con_rsrc == pd->rsrc && !console_suspend_enabled && !power_on)
+		return -EBUSY;
+
 	ret = imx_scu_call_rpc(pm_ipc_handle, &msg, true);
 	if (ret)
 		dev_err(&domain->dev, "failed to power %s resource %d ret %d\n",
-- 
2.37.1