[PATCH v2 4/6] dt-bindings: perf: Add Marvell Odyssey LLC-TAD pmu

[Krzysztof Kozlowski]

On 12/08/2023 16:25, Gowthami Thiagarajan wrote:
> Add binding documentation for Marvell Odyssey LLC-TAD performance
> monitor unit
> 
> Signed-off-by: Gowthami Thiagarajan <gthiagarajan at marvell.com>
> ---
> 
> v1->v2
> - Changed DT binding file name to match with compatible
> - Added respective document in MAINTAINERS
> 
>  .../perf/marvell,odyssey-tad-pmu.yaml         | 63 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/marvell,odyssey-tad-pmu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/perf/marvell,odyssey-tad-pmu.yaml b/Documentation/devicetree/bindings/perf/marvell,odyssey-tad-pmu.yaml
> new file mode 100644
> index 000000000000..a1b9ee71e5f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/marvell,odyssey-tad-pmu.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/perf/marvell,odyssey-tad-pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell Odyssey LLC-TAD performance monitor
> +
> +maintainers:
> +  - Gowthami Thiagarajan <gthiagarajan at marvell.com>
> +
> +description: |
> +  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
> +  shared on-chip last level cache (LLC). The tad pmu measures the
> +  performance of last-level cache. Each tad pmu supports up to eight
> +  counters.
> +
> +  The DT setup comprises of number of tad blocks, the sizes of pmu
> +  regions, tad blocks and overall base address of the HW.
> +
> +properties:
> +  compatible:
> +    const: marvell,odyssey-tad-pmu
> +
> +  reg:
> +    maxItems: 1
> +
> +  marvell,tad-cnt:
> +    description: specifies the number of tads on the soc

Why would it differ? Each SoC is the same, right? Like factory makes 1
million of the same SoCs, so tad-cnt is the same on each of them

Please drop.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  marvell,tad-page-size:
> +    description: specifies the size of each tad page
> +    $ref: /schemas/types.yaml#/definitions/uint32

Same questions.

> +
> +  marvell,tad-pmu-page-size:
> +    description: specifies the size of page that the pmu uses
> +    $ref: /schemas/types.yaml#/definitions/uint32

Same questions.

> +
> +required:
> +  - compatible
> +  - reg
> +  - marvell,tad-cnt
> +  - marvell,tad-page-size
> +  - marvell,tad-pmu-page-size
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +

No need for blank line.

> +    tad {

No clue what tad is, use some generic name.

> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +



Best regards,
Krzysztof