[PATCH 2/2] arm64: dts: imx8mm-evk: Fix hdmi at 3d node

[Liu Ying]

The hdmi at 3d node's compatible string is "adi,adv7535" instead of
"adi,adv7533" or "adi,adv751*".

Fix the hdmi at 3d node by means of:
* Use default register addresses for "cec", "edid" and "packet", because
  there is no need to use a non-default address map.
* Add missing interrupt related properties.
* Drop "adi,input-*" properties which are only valid for adv751*.
* Add "*-supply" properties, since most are required.
* Fix label names - s/adv7533/adv7535/.

Fixes: a27335b3f1e0 ("arm64: dts: imx8mm-evk: Add HDMI support")
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 25 ++++++++++---------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 7cd1cedfa9e9..6752c3027436 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -26,7 +26,7 @@ hdmi-connector {
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -324,15 +324,16 @@ &i2c2 {
 
 	hdmi at 3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v3p3-supply = <&reg_vddext_3v3>;
+		v1p2-supply = <&buck5_reg>;
 
 		ports {
 			#address-cells = <1>;
@@ -341,7 +342,7 @@ ports {
 			port at 0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -349,7 +350,7 @@ adv7533_in: endpoint {
 			port at 1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -415,7 +416,7 @@ port at 1 {
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
-- 
2.37.1