[PATCH 2/3] ARM: dts: imx6ul: mba6ulx: Fix gpio-keys button node names

[Shawn Guo]

On Thu, Aug 10, 2023 at 11:55:40AM +0200, Alexander Stein wrote:
> Numbers are separated by dashes. Fixes the warnings:
> arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dtb: gpio-keys:
> 'button1', 'button2', 'button3' do not match any of the regexes:
> '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
>  from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
> 
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>

It doesn't apply to my imx/dt branch.

Shawn

> ---
>  arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
> index 632ceadcca41..5a8b867d7d79 100644
> --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
> @@ -35,21 +35,21 @@ gpio_buttons: gpio-keys {
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_buttons>;
>  
> -		button1 {
> +		button-1 {
>  			label = "s14";
>  			linux,code = <KEY_1>;
>  			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
>  			wakeup-source;
>  		};
>  
> -		button2 {
> +		button-2 {
>  			label = "s6";
>  			linux,code = <KEY_2>;
>  			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
>  			wakeup-source;
>  		};
>  
> -		button3 {
> +		button-3 {
>  			label = "s7";
>  			linux,code = <KEY_3>;
>  			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
> -- 
> 2.34.1
>