[RFC v2 03/11] dt-bindings: iio: stm32-dfsdm-adc: add scaling support
Rob Herring
robh at kernel.org
Fri Aug 11 10:10:11 PDT 2023
On Thu, Jul 27, 2023 at 05:03:14PM +0200, Olivier Moysan wrote:
> Add scaling support to STM32 DFSDM.
>
> This introduces the following changes:
Why?
> - Add ADC generic channel binding and remove support of deprecated
> channel bindings.
When was it deprecated?
> - DFSDM is now implemented as a channel provider, so remove io-channels
> properties.
> - Add iio-backend property to connect DFSDM to an SD modulator.
io-backends
All sorts of ABI issues with this change. Please explain why you don't
care.
>
> Signed-off-by: Olivier Moysan <olivier.moysan at foss.st.com>
> ---
> .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 189 ++++++------------
> 1 file changed, 63 insertions(+), 126 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index 1970503389aa..128545cedc7f 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -85,22 +85,14 @@ patternProperties:
> description: Specifies the DFSDM filter instance used.
> maxItems: 1
>
> - interrupts:
> - maxItems: 1
> + '#address-cells':
> + const: 1
>
> - st,adc-channels:
> - description: |
> - List of single-ended channels muxed for this ADC.
> - On stm32h7 and stm32mp1:
> - - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
> - - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
> - $ref: /schemas/types.yaml#/definitions/uint32-array
> - items:
> - minimum: 0
> - maximum: 7
> + '#size-cells':
> + const: 0
>
> - st,adc-channel-names:
> - description: List of single-ended channel names.
> + interrupts:
> + maxItems: 1
>
> st,filter-order:
> description: |
> @@ -111,39 +103,6 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/uint32
> maximum: 5
>
> - "#io-channel-cells":
> - const: 1
> -
> - st,adc-channel-types:
> - description: |
> - Single-ended channel input type.
> - - "SPI_R": SPI with data on rising edge (default)
> - - "SPI_F": SPI with data on falling edge
> - - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
> - - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
> - items:
> - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
> - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> -
> - st,adc-channel-clk-src:
> - description: |
> - Conversion clock source.
> - - "CLKIN": external SPI clock (CLKIN x)
> - - "CLKOUT": internal SPI clock (CLKOUT) (default)
> - - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
> - - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
> - items:
> - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
> - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> -
> - st,adc-alt-channel:
> - description:
> - Must be defined if two sigma delta modulators are
> - connected on same SPI input.
> - If not set, channel n is connected to SPI input n.
> - If set, channel n is connected to SPI input n + 1.
> - type: boolean
> -
> st,filter0-sync:
> description:
> Set to 1 to synchronize with DFSDM filter instance 0.
> @@ -157,14 +116,68 @@ patternProperties:
> items:
> - const: rx
>
> + patternProperties:
> + "^channel@([0-9]|1[0-9])$":
> + type: object
> + $ref: "adc.yaml"
> + description: Represents the external channels which are connected to the DFSDM.
> +
> + properties:
> + reg:
> + items:
> + minimum: 0
> + maximum: 19
> +
> + label:
> + description: |
> + Unique name to identify channel.
> +
> + st,adc-channel-types:
> + description: |
> + Single-ended channel input type.
> + - "SPI_R": SPI with data on rising edge (default)
> + - "SPI_F": SPI with data on falling edge
> + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
> + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
> + items:
> + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +
> + st,adc-channel-clk-src:
> + description: |
> + Conversion clock source.
> + - "CLKIN": external SPI clock (CLKIN x)
> + - "CLKOUT": internal SPI clock (CLKOUT) (default)
> + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
> + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
> + items:
> + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +
> + st,adc-alt-channel:
> + description:
> + Must be defined if two sigma delta modulators are
> + connected on same SPI input.
> + If not set, channel n is connected to SPI input n.
> + If set, channel n is connected to SPI input n + 1.
> + type: boolean
> +
> + io-backends:
> + description: |
> + phandle to an external sigma delta modulator or internal ADC output.
> + $ref: /schemas/types.yaml#/definitions/phandle
> +
> + required:
> + - reg
> + - io-backends
> +
> + additionalProperties: false
> +
> required:
> - compatible
> - reg
> - interrupts
> - - st,adc-channels
> - - st,adc-channel-names
> - st,filter-order
> - - "#io-channel-cells"
>
> allOf:
> - if:
> @@ -175,14 +188,6 @@ patternProperties:
>
> then:
> properties:
> - st,adc-channels:
> - minItems: 1
> - maxItems: 8
> -
> - st,adc-channel-names:
> - minItems: 1
> - maxItems: 8
> -
> st,adc-channel-types:
> minItems: 1
> maxItems: 8
> @@ -191,14 +196,6 @@ patternProperties:
> minItems: 1
> maxItems: 8
>
> - io-channels:
> - description:
> - From common IIO binding. Used to pipe external sigma delta
> - modulator or internal ADC output to DFSDM channel.
> -
> - required:
> - - io-channels
> -
> - if:
> properties:
> compatible:
> @@ -207,12 +204,6 @@ patternProperties:
>
> then:
> properties:
> - st,adc-channels:
> - maxItems: 1
> -
> - st,adc-channel-names:
> - maxItems: 1
> -
> st,adc-channel-types:
> maxItems: 1
>
> @@ -237,15 +228,9 @@ patternProperties:
> "#sound-dai-cells":
> const: 0
>
> - io-channels:
> - description:
> - From common IIO binding. Used to pipe external sigma delta
> - modulator or internal ADC output to DFSDM channel.
> -
> required:
> - compatible
> - "#sound-dai-cells"
> - - io-channels
>
> allOf:
> - if:
> @@ -278,52 +263,4 @@ allOf:
> minimum: 0
> maximum: 5
>
> -examples:
> - - |
> - #include <dt-bindings/interrupt-controller/arm-gic.h>
> - #include <dt-bindings/clock/stm32mp1-clks.h>
> - dfsdm: dfsdm at 4400d000 {
> - compatible = "st,stm32mp1-dfsdm";
> - reg = <0x4400d000 0x800>;
> - clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;
> - clock-names = "dfsdm", "audio";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - dfsdm0: filter at 0 {
> - compatible = "st,stm32-dfsdm-dmic";
> - reg = <0>;
> - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&dmamux1 101 0x400 0x01>;
> - dma-names = "rx";
> - #io-channel-cells = <1>;
> - st,adc-channels = <1>;
> - st,adc-channel-names = "dmic0";
> - st,adc-channel-types = "SPI_R";
> - st,adc-channel-clk-src = "CLKOUT";
> - st,filter-order = <5>;
> -
> - asoc_pdm0: dfsdm-dai {
> - compatible = "st,stm32h7-dfsdm-dai";
> - #sound-dai-cells = <0>;
> - io-channels = <&dfsdm0 0>;
> - };
> - };
> -
> - dfsdm_pdm1: filter at 1 {
> - compatible = "st,stm32-dfsdm-adc";
> - reg = <1>;
> - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&dmamux1 102 0x400 0x01>;
> - dma-names = "rx";
> - #io-channel-cells = <1>;
> - st,adc-channels = <2 3>;
> - st,adc-channel-names = "in2", "in3";
> - st,adc-channel-types = "SPI_R", "SPI_R";
> - st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
> - io-channels = <&sd_adc2 &sd_adc3>;
> - st,filter-order = <1>;
> - };
> - };
> -
> ...
> --
> 2.25.1
>
More information about the linux-arm-kernel
mailing list