[PATCH v3 2/2] PCI: xilinx-nwl: Increase ECAM size to accommodate 256 buses

[Rob Herring]

On Thu, Aug 10, 2023 at 05:50:02PM +0530, Thippeswamy Havalige wrote:
> Our controller is expecting ECAM size to be programmed by software. By
> programming "NWL_ECAM_VALUE_DEFAULT  12" controller can access up to 16MB
> ECAM region which is used to detect 16 buses, so by updating
> "NWL_ECAM_VALUE_DEFAULT" to 16 so that controller can access up to 256MB
> ECAM region to detect 256 buses.

What happens when your DT has the smaller size and the kernel configures 
the larger size? Seems like you could have an ABI issue.

> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige at amd.com>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada at amd.com>
> ---
> changes in v3:
> - Remove unnecessary period at end of subject line.
> changes in v2:
> - Update this changes in a seperate patch.
> ---
>  drivers/pci/controller/pcie-xilinx-nwl.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
> index d8a3a08be1d5..b51501921d3b 100644
> --- a/drivers/pci/controller/pcie-xilinx-nwl.c
> +++ b/drivers/pci/controller/pcie-xilinx-nwl.c
> @@ -126,7 +126,7 @@
>  #define E_ECAM_CR_ENABLE		BIT(0)
>  #define E_ECAM_SIZE_LOC			GENMASK(20, 16)
>  #define E_ECAM_SIZE_SHIFT		16
> -#define NWL_ECAM_VALUE_DEFAULT		12
> +#define NWL_ECAM_VALUE_DEFAULT		16

Not really a meaningful name. It doesn't explain what '16' means.

>  #define CFG_DMA_REG_BAR			GENMASK(2, 0)
>  #define CFG_PCIE_CACHE			GENMASK(7, 0)
> @@ -165,7 +165,6 @@ struct nwl_pcie {
>  	u32 ecam_size;
>  	int irq_intx;
>  	int irq_misc;
> -	u32 ecam_value;
>  	struct nwl_msi msi;
>  	struct irq_domain *legacy_irq_domain;
>  	struct clk *clk;
> @@ -674,7 +673,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
>  			  E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
>  
>  	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> -			  (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
> +			  (NWL_ECAM_VALUE_DEFAULT << E_ECAM_SIZE_SHIFT),
>  			  E_ECAM_CONTROL);
>  
>  	nwl_bridge_writel(pcie, lower_32_bits(pcie->phys_ecam_base),
> @@ -782,7 +781,6 @@ static int nwl_pcie_probe(struct platform_device *pdev)
>  	pcie = pci_host_bridge_priv(bridge);
>  
>  	pcie->dev = dev;
> -	pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
>  
>  	err = nwl_pcie_parse_dt(pcie, pdev);
>  	if (err) {
> -- 
> 2.17.1
>