[PATCH 1/3] arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
Kumar, Udit
u-kumar1 at ti.com
Thu Aug 10 01:50:37 PDT 2023
Thanks Andrew
On 8/9/2023 11:31 PM, Andrew Davis wrote:
> C7x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete
> and will not be functional unless they are extended with both mboxes and
> memory-region information.
>
> As theses only known about at the board integration level, these nodes
> should only be enabled when provided with this information.
>
> Disable the C7x DSP nodes in the dtsi files and only enable the ones that
> are given the required mboxes and memory-region on a given board.
>
> Signed-off-by: Andrew Davis <afd at ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 1 +
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 +
> arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1 +
> arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 1 +
> 4 files changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> index 66aac145e7530..d1235e7c786d6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> @@ -1024,6 +1024,7 @@ &c66_1 {
> };
>
> &c71_0 {
> + status = "okay";
> mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
> memory-region = <&c71_0_dma_memory_region>,
> <&c71_0_memory_region>;
Series tested on J721E, J784S4 platforms
However I need to apply
https://lore.kernel.org/linux-iommu/0-v2-d2762acaf50a+16d-iommu_group_locking2_jgg@nvidia.com/
patch
Tested-by: Udit Kumar <u-kumar1 at ti.com>
https://gist.github.com/uditkumarti/b6320a06fadaaaf174fc0431949f11e1
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 3acd55ffd4ffc..1aeb97b42b34b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -2134,6 +2134,7 @@ c71_0: dsp at 64800000 {
> ti,sci-proc-ids = <0x30 0xff>;
> resets = <&k3_reset 15 1>;
> firmware-name = "j7-c71_0-fw";
> + status = "disabled";
> };
>
> icssg0: icssg at b000000 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> index 0ee4f38ec8f03..377588ba30998 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> @@ -1110,6 +1110,7 @@ &c66_1 {
> };
>
> &c71_0 {
> + status = "okay";
> mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
> memory-region = <&c71_0_dma_memory_region>,
> <&c71_0_memory_region>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> index e90e43202546e..3c31ab57e959c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> @@ -436,6 +436,7 @@ &c66_1 {
> };
>
> &c71_0 {
> + status = "okay";
> mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
> memory-region = <&c71_0_dma_memory_region>,
> <&c71_0_memory_region>;
More information about the linux-arm-kernel
mailing list