[PATCH v2 0/5] Add R5F and C7x DSP nodes for AM62a SoC

[Hari Nagalla]

This patch series adds R5F and C7x dsp processor nodes for AM62A SoC.
The first patch amends the dsp node binding doc file and the remaining
patches configure the remote processor device nodes.

v1: https://lore.kernel.org/all/20230502141416.9924-1-hnagalla@ti.com/ 

Devarsh Thakkar (2):
  arm64: dts: k3-am62a-wakeup: Add R5F device node
  arm64: dts: ti: k3-am62a7-sk: Enable ipc with remote proc nodes

Hari Nagalla (2):
  dt-bindings: remoteproc: k3-dsp: correct optional sram properties for
    AM62A SoCs
  arm64: dts: k3-am62a-mcu: Add R5F remote proc node

Jai Luthra (1):
  arm64: dts: k3-am62a-main: Add C7xv device node

 .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  | 16 ++++-
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     | 11 +++
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi      | 35 ++++++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   | 23 +++++++
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       | 68 +++++++++++++++++++
 5 files changed, 151 insertions(+), 2 deletions(-)

-- 
2.34.1