[PATCH] perf/core: fix the bug in the event multiplexing

[Shijie Huang]

Hi Mark,

在 2023/8/9 17:22, Mark Rutland 写道:
> On Wed, Aug 09, 2023 at 08:25:07AM +0000, Oliver Upton wrote:
>> Hi Huang,
>>
>> On Wed, Aug 09, 2023 at 09:39:53AM +0800, Huang Shijie wrote:
>>> 2.) Root cause.
>>> 	There is only 7 counters in my arm64 platform:
>>> 	  (one cycle counter) + (6 normal counters)
>>>
>>> 	In 1.3 above, we will use 10 event counters.
>>> 	Since we only have 7 counters, the perf core will trigger
>>>         	event multiplexing in hrtimer:
>>> 	     merge_sched_in() -->perf_mux_hrtimer_restart() -->
>>> 	     perf_rotate_context().
>>>
>>>         In the perf_rotate_context(), it does not restore some PMU registers
>>>         as context_switch() does.  In context_switch():
>>>               kvm_sched_in()  --> kvm_vcpu_pmu_restore_guest()
>>>               kvm_sched_out() --> kvm_vcpu_pmu_restore_host()
>>>
>>>         So we got wrong result.
>> This is a rather vague description of the problem. AFAICT, the
>> issue here is on VHE systems we wind up getting the EL0 count
>> enable/disable bits backwards when entering the guest, which is
>> corroborated by the data you have below.
> Yep; IIUC the issue here is that when we take an IRQ from a guest and reprogram
> the PMU in the IRQ handler, the IRQ handler will program the PMU with
> appropriate host/guest/user/etc filters for a *host* context, and then we'll
> return back into the guest without reconfigurign the event filtering for a
> *guest* context.
Yes.
>
> That can happen for perf_rotate_context(), or when we install an event into a
> running context, as that'll happen via an IPI.
>
>>> +void arch_perf_rotate_pmu_set(void)
>>> +{
>>> +	if (is_guest())
>>> +		kvm_vcpu_pmu_restore_guest(NULL);
>>> +	else
>>> +		kvm_vcpu_pmu_restore_host(NULL);
>>> +}
>>> +
>> This sort of hook is rather nasty, and I'd strongly prefer a solution
>> that's confined to KVM. I don't think the !is_guest() branch is
>> necessary at all. Regardless of how the pmu context is changed, we need
>> to go through vcpu_put() before getting back out to userspace.
>>
>> We can check for a running vCPU (ick) from kvm_set_pmu_events() and either
>> do the EL0 bit flip there or make a request on the vCPU to call
>> kvm_vcpu_pmu_restore_guest() immediately before reentering the guest.
>> I'm slightly leaning towards the latter, unless anyone has a better idea
>> here.
> The latter sounds reasonable to me.

okay. I prefer the latter one now. :)


Thanks

Huang Shijie

>
> I suspect we need to take special care here to make sure we leave *all* events
> in a good state when re-entering the guest or if we get to kvm_sched_out()
> after *removing* an event via an IPI -- it'd be easy to mess either case up and
> leave some events in a bad state.
>
> Thanks,
> Mark.