[PATCH v7 05/13] coresight-tpdm: Initialize DSB subunit configuration

Tao Zhang quic_taozha at quicinc.com
Tue Aug 8 23:29:08 PDT 2023


On 8/7/2023 5:28 PM, Suzuki K Poulose wrote:
> On 25/07/2023 08:15, Tao Zhang wrote:
>> DSB is used for monitoring “events”. Events are something that
>> occurs at some point in time. It could be a state decode, the
>> act of writing/reading a particular address, a FIFO being empty,
>> etc. This decoding of the event desired is done outside TPDM.
>> DSB subunit need to be configured in enablement and disablement.
>> A struct that specifics associated to dsb dataset is needed. It
>> saves the configuration and parameters of the dsb datasets. This
>> change is to add this struct and initialize the configuration of
>> DSB subunit.
>>
>> Signed-off-by: Tao Zhang <quic_taozha at quicinc.com>
>> ---
>>   drivers/hwtracing/coresight/coresight-tpdm.c | 55 
>> ++++++++++++++++++++++++++--
>>   drivers/hwtracing/coresight/coresight-tpdm.h | 18 +++++++++
>>   2 files changed, 69 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c 
>> b/drivers/hwtracing/coresight/coresight-tpdm.c
>> index abaff0b..52aa48a6 100644
>> --- a/drivers/hwtracing/coresight/coresight-tpdm.c
>> +++ b/drivers/hwtracing/coresight/coresight-tpdm.c
>> @@ -20,17 +20,46 @@
>>     DEFINE_CORESIGHT_DEVLIST(tpdm_devs, "tpdm");
>>   +static void tpdm_reset_datasets(struct tpdm_drvdata *drvdata)
>> +{
>> +    if (drvdata->datasets & TPDM_PIDR0_DS_DSB) {
>
> Do we need a helper for this, we seem to be doing this more than once ?
>
> tpdm_has_dsb_dataset(drvdata) ?
Sure, I will update this in the next patch series.
>
>> +        memset(drvdata->dsb, 0, sizeof(struct dsb_dataset));
>> +
>> +        drvdata->dsb->trig_ts = true;
>> +        drvdata->dsb->trig_type = false;
>> +    }
>> +}
>> +
>>   static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata)
>>   {
>>       u32 val;
>>   -    /* Set the enable bit of DSB control register to 1 */
>> +    val = readl_relaxed(drvdata->base + TPDM_DSB_TIER);
>> +    /* Set trigger timestamp */
>> +    if (drvdata->dsb->trig_ts)
>> +        val |= TPDM_DSB_TIER_XTRIG_TSENAB;
>> +    else
>> +        val &= ~TPDM_DSB_TIER_XTRIG_TSENAB;
>> +    writel_relaxed(val, drvdata->base + TPDM_DSB_TIER);
>> +
>>       val = readl_relaxed(drvdata->base + TPDM_DSB_CR);
>> +    /* Set trigger type */
>> +    if (drvdata->dsb->trig_type)
>> +        val |= TPDM_DSB_CR_TRIG_TYPE;
>> +    else
>> +        val &= ~TPDM_DSB_CR_TRIG_TYPE;
>> +    /* Set the enable bit of DSB control register to 1 */
>>       val |= TPDM_DSB_CR_ENA;
>>       writel_relaxed(val, drvdata->base + TPDM_DSB_CR);
>>   }
>>   -/* TPDM enable operations */
>> +/* TPDM enable operations
>
> minor nit:
>
> /*
>  * TPDM enable..
I will update this in the next patch series.
>
>> + * The TPDM or Monitor serves as data collection component for various
>> + * dataset types. It covers Basic Counts(BC), Tenure Counts(TC),
>> + * Continuous Multi-Bit(CMB), Multi-lane CMB(MCMB) and Discrete Single
>> + * Bit(DSB). This function will initialize the configuration according
>> + * to the dataset type supported by the TPDM.
>> + */
>>   static void __tpdm_enable(struct tpdm_drvdata *drvdata)
>>   {
>>       CS_UNLOCK(drvdata->base);
>> @@ -110,13 +139,24 @@ static const struct coresight_ops tpdm_cs_ops = {
>>       .source_ops    = &tpdm_source_ops,
>>   };
>>   -static void tpdm_init_default_data(struct tpdm_drvdata *drvdata)
>> +static int tpdm_datasets_setup(struct tpdm_drvdata *drvdata)
>>   {
>>       u32 pidr;
>>         /*  Get the datasets present on the TPDM. */
>>       pidr = readl_relaxed(drvdata->base + CORESIGHT_PERIPHIDR0);
>>       drvdata->datasets |= pidr & GENMASK(TPDM_DATASETS - 1, 0);
>> +
>> +    if (drvdata->datasets & TPDM_PIDR0_DS_DSB) {
>> +        if (!drvdata->dsb) {
>
> This could be :
>
>     if (tpdm_has_dsb_dataset(drvdata) && !drvdata->dsb) {
I will update this in the next patch series.
>> +            drvdata->dsb = devm_kzalloc(drvdata->dev,
>> +                            sizeof(*drvdata->dsb), GFP_KERNEL);
>> +            if (!drvdata->dsb)
>> +                return -ENOMEM;
>
>     }
>
>> +        }
>> +    }
>
> Could we move the reset datasets here ?
>     tpdm_reset_datasets(drvdata);
I will update this in the next patch series.
>
>> +
>> +    return 0;
>>   }
>>     /*
>> @@ -179,6 +219,7 @@ static int tpdm_probe(struct amba_device *adev, 
>> const struct amba_id *id)
>>       struct coresight_platform_data *pdata;
>>       struct tpdm_drvdata *drvdata;
>>       struct coresight_desc desc = { 0 };
>> +    int ret;
>>         pdata = coresight_get_platform_data(dev);
>>       if (IS_ERR(pdata))
>> @@ -198,6 +239,12 @@ static int tpdm_probe(struct amba_device *adev, 
>> const struct amba_id *id)
>>         drvdata->base = base;
>>   +    ret = tpdm_datasets_setup(drvdata);
>> +    if (ret)
>> +        return ret;
>> +
>> +    tpdm_reset_datasets(drvdata);
>
> ^^ We could move this to datasets_setup(), see above.
I will update this in the next patch series.
>
>> +
>>       /* Set up coresight component description */
>>       desc.name = coresight_alloc_device_name(&tpdm_devs, dev);
>>       if (!desc.name)
>> @@ -214,7 +261,7 @@ static int tpdm_probe(struct amba_device *adev, 
>> const struct amba_id *id)
>>           return PTR_ERR(drvdata->csdev);
>>         spin_lock_init(&drvdata->spinlock);
>> -    tpdm_init_default_data(drvdata);
>> +
>>       /* Decrease pm refcount when probe is done.*/
>>       pm_runtime_put(&adev->dev);
>>   diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h 
>> b/drivers/hwtracing/coresight/coresight-tpdm.h
>> index 5438540..92c34cd 100644
>> --- a/drivers/hwtracing/coresight/coresight-tpdm.h
>> +++ b/drivers/hwtracing/coresight/coresight-tpdm.h
>> @@ -11,8 +11,14 @@
>>     /* DSB Subunit Registers */
>>   #define TPDM_DSB_CR        (0x780)
>> +#define TPDM_DSB_TIER        (0x784)
>> +
>>   /* Enable bit for DSB subunit */
>>   #define TPDM_DSB_CR_ENA        BIT(0)
>> +/* Enable bit for DSB subunit trigger type */
>> +#define TPDM_DSB_CR_TRIG_TYPE        BIT(12)
>> +/* Enable bit for DSB subunit trigger timestamp */
>> +#define TPDM_DSB_TIER_XTRIG_TSENAB        BIT(1)
>>     /* TPDM integration test registers */
>>   #define TPDM_ITATBCNTRL        (0xEF0)
>> @@ -41,6 +47,16 @@
>>   #define TPDM_PIDR0_DS_DSB    BIT(1)
>>     /**
>> + * struct dsb_dataset - specifics associated to dsb dataset
>> + * @trig_ts:          Enable/Disable trigger timestamp.
>> + * @trig_type:        Enable/Disable trigger type.
>> + */
>> +struct dsb_dataset {
>> +    bool            trig_ts;
>> +    bool            trig_type;
>> +};
>> +
>> +/**
>>    * struct tpdm_drvdata - specifics associated to an TPDM component
>>    * @base:       memory mapped base address for this component.
>>    * @dev:        The device entity associated to this component.
>> @@ -48,6 +64,7 @@
>>    * @spinlock:   lock for the drvdata value.
>>    * @enable:     enable status of the component.
>>    * @datasets:   The datasets types present of the TPDM.
>> + * @dsb         Specifics associated to an TPDM component.
>
>             TPDM DSB related settings ?

I will update this in the next patch series.


Best,

Tao

>
> Suzuki
>
>
>>    */
>>     struct tpdm_drvdata {
>> @@ -57,6 +74,7 @@ struct tpdm_drvdata {
>>       spinlock_t        spinlock;
>>       bool            enable;
>>       unsigned long        datasets;
>> +    struct dsb_dataset    *dsb;
>>   };
>>     #endif  /* _CORESIGHT_CORESIGHT_TPDM_H */
>



More information about the linux-arm-kernel mailing list