[PATCH] dt-bindings: remoteproc: pru: Add Interrupt property

[Md Danish Anwar]

On 08/08/23 4:18 pm, Conor Dooley wrote:
> On Tue, Aug 08, 2023 at 03:14:31PM +0530, Md Danish Anwar wrote:
>> Hi Conor,
>>
>> On 07/08/23 8:09 pm, Conor Dooley wrote:
>>> On Mon, Aug 07, 2023 at 04:38:36PM +0530, MD Danish Anwar wrote:
>>>> Add interrupts and interrupt-names protperties for PRU and RTU cores.
>>>>
>>>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>>>> ---
>>>>  .../bindings/remoteproc/ti,pru-rproc.yaml     | 22 +++++++++++++++++++
>>>>  1 file changed, 22 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>>> index cd55d80137f7..6970316943bb 100644
>>>> --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>>> +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>>> @@ -66,6 +66,16 @@ properties:
>>>>        Should contain the name of the default firmware image
>>>>        file located on the firmware search path.
>>>>  
>>>> +  interrupts:
>>>> +    maxItems: 1
>>>> +    description:
>>>> +      Interrupt specifiers enable the virtio/rpmsg communication between MPU
>>>> +      and the PRU/RTU cores.
>>>> +
>>>> +  interrupt-names:
>>>> +    items:
>>>> +      - const: vring
>>>> +
>>>>  if:
>>>>    properties:
>>>>      compatible:
>>>> @@ -171,6 +181,9 @@ examples:
>>>>                <0x22400 0x100>;
>>>>          reg-names = "iram", "control", "debug";
>>>>          firmware-name = "am65x-pru0_0-fw";
>>>> +        interrupt-parent = <&icssg0_intc>;
>>>> +        interrupts = <16 2 2>;
>>>> +        interrupt-names = "vring";
>>>>        };
>>>
>>> These examples would probably be more helpful if they used the
>>> appropriate defines, no?
>>>
>>
>> PRUSS Interrupt controller doesn't have any appropriate defines. This doesn't
>> use GIC so defines from arm-gic.h can not be used here. These are specific to
>> PRUSS INTC.
> 
> I was deliberately vague in case the gic stuff applied too, but my main
> question was about the standard defines used for interrupt types.
> 

There are no standard defines for these interrupt types. However I can create a
new .h file defining all the three interrupt cells and their values for both
PRU and RTU cores if you think that is required. Otherwise we can go with
hardcoded values.

Please let me know what you think should be done here.

>> I think these example are OK. Please let me know if this is OK to you.

-- 
Thanks and Regards,
Danish.