[PATCH v2 3/6] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks

[Konrad Dybcio]

Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.

Use the BRANCH_HALT_SKIP define to skip checking the halt bit.

Fixes: db2c7c0a04b1 ("clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk")
Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo at quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
 drivers/clk/qcom/gcc-msm8998.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 1ba516a0c0f3..257b27d8eeb6 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2060,7 +2060,7 @@ static struct clk_branch gcc_gp3_clk = {
 
 static struct clk_branch gcc_bimc_gfx_clk = {
 	.halt_reg = 0x46040,
-	.halt_check = BRANCH_HALT,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x46040,
 		.enable_mask = BIT(0),
@@ -2073,7 +2073,7 @@ static struct clk_branch gcc_bimc_gfx_clk = {
 
 static struct clk_branch gcc_gpu_bimc_gfx_clk = {
 	.halt_reg = 0x71010,
-	.halt_check = BRANCH_HALT,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x71010,
 		.enable_mask = BIT(0),
@@ -2099,7 +2099,7 @@ static struct clk_branch gcc_gpu_bimc_gfx_src_clk = {
 
 static struct clk_branch gcc_gpu_cfg_ahb_clk = {
 	.halt_reg = 0x71004,
-	.halt_check = BRANCH_HALT,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x71004,
 		.enable_mask = BIT(0),

-- 
2.41.0