[PATCH 4/6] serial: stm32: group dma pause/resume error handling into single function
Valentin Caron
valentin.caron at foss.st.com
Thu Aug 3 06:01:32 PDT 2023
Create new function "stm32_usart_dma_pause_resume" that called dmaengine_
pause/resume and in case of error, terminate dma transaction.
Two other functions are created to facilitate the use of stm32_usart_dma
_pause_resume : stm32_usart_tx_dma_pause, stm32_usart_tx_dma_resume.
Equivalent functions for rx will be added in future patch.
Signed-off-by: Valentin Caron <valentin.caron at foss.st.com>
---
drivers/tty/serial/stm32-usart.c | 127 ++++++++++++++++++++-----------
drivers/tty/serial/stm32-usart.h | 1 +
2 files changed, 83 insertions(+), 45 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 3471e23bb02f..0dae05a7abe6 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -290,14 +290,40 @@ static int stm32_usart_init_rs485(struct uart_port *port,
}
static bool stm32_usart_rx_dma_started(struct stm32_port *stm32_port)
+{
+ return stm32_port->rx_ch ? stm32_port->rx_dma_busy : false;
+}
+
+static void stm32_usart_rx_dma_terminate(struct stm32_port *stm32_port)
+{
+ dmaengine_terminate_async(stm32_port->rx_ch);
+ stm32_port->rx_dma_busy = false;
+}
+
+static int stm32_usart_dma_pause_resume(struct stm32_port *stm32_port,
+ struct dma_chan *chan,
+ enum dma_status expected_status,
+ int dmaengine_pause_or_resume(struct dma_chan *),
+ bool stm32_usart_xx_dma_started(struct stm32_port *),
+ void stm32_usart_xx_dma_terminate(struct stm32_port *))
{
struct uart_port *port = &stm32_port->port;
- const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ enum dma_status dma_status;
+ int ret;
+
+ if (!stm32_usart_xx_dma_started(stm32_port))
+ return -EPERM;
- if (!stm32_port->rx_ch)
- return false;
+ dma_status = dmaengine_tx_status(chan, chan->cookie, NULL);
+ if (dma_status != expected_status)
+ return -EAGAIN;
- return !!(readl_relaxed(port->membase + ofs->cr3) & USART_CR3_DMAR);
+ ret = dmaengine_pause_or_resume(chan);
+ if (ret) {
+ dev_err(port->dev, "DMA failed with error code: %d\n", ret);
+ stm32_usart_xx_dma_terminate(stm32_port);
+ }
+ return ret;
}
/* Return true when data is pending (in pio mode), and false when no data is pending. */
@@ -475,7 +501,7 @@ static unsigned int stm32_usart_receive_chars(struct uart_port *port, bool force
}
} else {
/* Disable RX DMA */
- dmaengine_terminate_async(stm32_port->rx_ch);
+ stm32_usart_rx_dma_terminate(stm32_port);
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
/* Fall back to interrupt mode */
dev_dbg(port->dev, "DMA error, fallback to irq mode\n");
@@ -506,6 +532,22 @@ static bool stm32_usart_tx_dma_started(struct stm32_port *stm32_port)
return stm32_port->tx_dma_busy;
}
+static int stm32_usart_tx_dma_pause(struct stm32_port *stm32_port)
+{
+ return stm32_usart_dma_pause_resume(stm32_port, stm32_port->tx_ch,
+ DMA_IN_PROGRESS, dmaengine_pause,
+ stm32_usart_tx_dma_started,
+ stm32_usart_tx_dma_terminate);
+}
+
+static int stm32_usart_tx_dma_resume(struct stm32_port *stm32_port)
+{
+ return stm32_usart_dma_pause_resume(stm32_port, stm32_port->tx_ch,
+ DMA_PAUSED, dmaengine_resume,
+ stm32_usart_tx_dma_started,
+ stm32_usart_tx_dma_terminate);
+}
+
static void stm32_usart_tx_dma_complete(void *arg)
{
struct uart_port *port = arg;
@@ -606,13 +648,9 @@ static void stm32_usart_transmit_chars_dma(struct uart_port *port)
int ret;
if (stm32_usart_tx_dma_started(stm32port)) {
- if (dmaengine_tx_status(stm32port->tx_ch,
- stm32port->tx_ch->cookie,
- NULL) == DMA_PAUSED) {
- ret = dmaengine_resume(stm32port->tx_ch);
- if (ret < 0)
- goto dma_err;
- }
+ ret = stm32_usart_tx_dma_resume(stm32port);
+ if (ret < 0 && ret != -EAGAIN)
+ goto fallback_err;
return;
}
@@ -658,8 +696,12 @@ static void stm32_usart_transmit_chars_dma(struct uart_port *port)
/* Push current DMA TX transaction in the pending queue */
/* DMA no yet started, safe to free resources */
- if (dma_submit_error(dmaengine_submit(desc)))
- goto dma_err;
+ ret = dma_submit_error(dmaengine_submit(desc));
+ if (ret) {
+ dev_err(port->dev, "DMA failed with error code: %d\n", ret);
+ stm32_usart_tx_dma_terminate(stm32port);
+ goto fallback_err;
+ }
/* Issue pending DMA TX requests */
dma_async_issue_pending(stm32port->tx_ch);
@@ -668,10 +710,6 @@ static void stm32_usart_transmit_chars_dma(struct uart_port *port)
return;
-dma_err:
- dev_err(port->dev, "DMA failed with error code: %d\n", ret);
- stm32_usart_tx_dma_terminate(stm32port);
-
fallback_err:
stm32_usart_transmit_chars_pio(port);
}
@@ -693,16 +731,9 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
}
if (port->x_char) {
- if (stm32_usart_tx_dma_started(stm32_port) &&
- dmaengine_tx_status(stm32_port->tx_ch,
- stm32_port->tx_ch->cookie,
- NULL) == DMA_IN_PROGRESS) {
- ret = dmaengine_pause(stm32_port->tx_ch);
- if (ret < 0) {
- dev_err(port->dev, "DMA failed with error code: %d\n", ret);
- stm32_usart_tx_dma_terminate(stm32_port);
- }
- }
+ /* dma terminate may have been called in case of dma pause failure */
+ stm32_usart_tx_dma_pause(stm32_port);
+
/* Check that TDR is empty before filling FIFO */
ret =
readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
@@ -716,13 +747,8 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
port->x_char = 0;
port->icount.tx++;
- if (stm32_usart_tx_dma_started(stm32_port)) {
- ret = dmaengine_resume(stm32_port->tx_ch);
- if (ret < 0) {
- dev_err(port->dev, "DMA failed with error code: %d\n", ret);
- stm32_usart_tx_dma_terminate(stm32_port);
- }
- }
+ /* dma terminate may have been called in case of dma resume failure */
+ stm32_usart_tx_dma_resume(stm32_port);
return;
}
@@ -855,16 +881,11 @@ static void stm32_usart_disable_ms(struct uart_port *port)
static void stm32_usart_stop_tx(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
- int ret;
stm32_usart_tx_interrupt_disable(port);
- if (stm32_usart_tx_dma_started(stm32_port)) {
- ret = dmaengine_pause(stm32_port->tx_ch);
- if (ret < 0) {
- dev_err(port->dev, "DMA failed with error code: %d\n", ret);
- stm32_usart_tx_dma_terminate(stm32_port);
- }
- }
+
+ /* dma terminate may have been called in case of dma pause failure */
+ stm32_usart_tx_dma_pause(stm32_port);
stm32_usart_rs485_rts_disable(port);
}
@@ -965,8 +986,22 @@ static int stm32_usart_start_rx_dma_cyclic(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct dma_async_tx_descriptor *desc;
+ enum dma_status rx_dma_status;
int ret;
+ if (stm32_port->rx_dma_busy) {
+ rx_dma_status = dmaengine_tx_status(stm32_port->rx_ch,
+ stm32_port->rx_ch->cookie,
+ NULL);
+ if (rx_dma_status == DMA_IN_PROGRESS)
+ return 0;
+
+ dev_err(port->dev, "DMA failed : status error.\n");
+ stm32_usart_rx_dma_terminate(stm32_port);
+ }
+
+ stm32_port->rx_dma_busy = true;
+
stm32_port->last_res = RX_BUF_L;
/* Prepare a DMA cyclic transaction */
desc = dmaengine_prep_dma_cyclic(stm32_port->rx_ch,
@@ -976,6 +1011,7 @@ static int stm32_usart_start_rx_dma_cyclic(struct uart_port *port)
DMA_PREP_INTERRUPT);
if (!desc) {
dev_err(port->dev, "rx dma prep cyclic failed\n");
+ stm32_port->rx_dma_busy = false;
return -ENODEV;
}
@@ -986,6 +1022,7 @@ static int stm32_usart_start_rx_dma_cyclic(struct uart_port *port)
ret = dma_submit_error(dmaengine_submit(desc));
if (ret) {
dmaengine_terminate_sync(stm32_port->rx_ch);
+ stm32_port->rx_dma_busy = false;
return ret;
}
@@ -1074,7 +1111,7 @@ static void stm32_usart_shutdown(struct uart_port *port)
/* Disable RX DMA. */
if (stm32_port->rx_ch)
- dmaengine_terminate_async(stm32_port->rx_ch);
+ stm32_usart_rx_dma_terminate(stm32_port);
/* flush RX & TX FIFO */
if (ofs->rqr != UNDEF_REG)
@@ -1988,7 +2025,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port,
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
/* Poll data from DMA RX buffer if any */
size = stm32_usart_receive_chars(port, true);
- dmaengine_terminate_async(stm32_port->rx_ch);
+ stm32_usart_rx_dma_terminate(stm32_port);
uart_unlock_and_check_sysrq_irqrestore(port, flags);
if (size)
tty_flip_buffer_push(tport);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 903285b5aea7..f59f831b2a10 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -199,6 +199,7 @@ struct stm32_port {
u32 cr3_irq; /* USART_CR3_RXFTIE */
int last_res;
bool tx_dma_busy; /* dma tx transaction in progress */
+ bool rx_dma_busy; /* dma rx transaction in progress */
bool throttled; /* port throttled */
bool hw_flow_control;
bool swap; /* swap RX & TX pins */
--
2.25.1
More information about the linux-arm-kernel
mailing list