[PATCH v4 2/6] arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs

Kumar, Udit u-kumar1 at ti.com
Thu Aug 3 05:43:18 PDT 2023


Thanks Vaishnav

On 8/3/2023 4:43 PM, Vaishnav Achath wrote:
>
> On 03/08/23 16:01, Kumar, Udit wrote:
>> Hi Esteban
>>
> Hi Esteban, Udit,
>
>>> [...]
>>> Signed-off-by: Esteban Blanc <eblanc at baylibre.com>
>>> ---
>>> arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 199 +++++++++++++++++++
>>> 1 file changed, 199 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
>>> b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
>>> index d57dd43da0ef..5348aafe3277 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
>>> @@ -61,6 +61,15 @@ J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20)
>>> MCU_OSPI0_LBCLKO */
>>> 	};
>>> };
>>>
>>> +&wkup_pmx1 {
>>> +	pmic_irq_pins_default: pmic-irq-pins-default {
>>> +		pinctrl-single,pins = <
>>> +			/* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
>>> +			J721S2_WKUP_IOPAD(0x28, PIN_INPUT, 7)
>>> +		>;
>> I see, this pin is getting shared with OSPI-1 .
>> I think either OSPI or PMIC could be functional at one time ?
>>
> OSPI CS1 is not being used, so the corresponding entry under OSPI1 can be removed.


let me handle this in on going series

https://lore.kernel.org/all/20230802113500.162276-1-u-kumar1@ti.com/

> Thanks and Regards,
> Vaishnav
>
>>> +	};
>>> +};
>>> +
>>>   [...]



More information about the linux-arm-kernel mailing list