[PATCH 2/2] ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board

[claudiu beznea]

Hi, Mihai,

On 02.08.2023 15:19, Mihai.Sain at microchip.com wrote:
>> +&macb0 {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
>> +     #address-cells = <1>;
>> +     #size-cells = <0>;
>> +     phy-mode = "rmii";
>> +     status = "disabled";
> Should any phy/mdio container be placed here? Also, any reason this node is disabled?
> The board has no phy.
> We will add external phy boards to macb interface and they will be present in dt-overlay.
> 

Then remove the macb0 node from here and keep it in overlay.

Thank you,
Claudiu Beznea