[PATCH v6] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain

[Nishanth Menon]

Hi Bhavya Kapoor,

On Tue, 25 Jul 2023 14:29:39 +0530, Bhavya Kapoor wrote:
> CAN instances 3 and 5 in the main domain are brought on the common
> processor board through header J27 and J28. The CAN High and Low lines
> from the SoC are routed through a mux on the SoM. The select lines need
> to be set for the CAN signals to get connected to the transceivers on
> the common processor board. Threfore, add respective mux, transceiver
> dt nodes to add support for these CAN instances.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain
      commit: 98f3b667e1de99dc670e12563eae03e15c668d95

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D