[PATCH] arm64: dts: Add a device tree file for Emtop SOM IMX8MM

Himanshu Bhavani himanshu.bhavani at siliconsignals.io
Sat Apr 29 06:44:59 PDT 2023


>From 9b2f563e1286c960ad81bc78ec811029ffb2f57a Mon Sep 17 00:00:00 2001
From: Himanshu Bhavani <himanshu.bhavani at siliconsignals.io>
Date: Sat, 29 Apr 2023 19:03:53 +0530
Subject: [PATCH] Add a device tree file for Emtop SOM IMX8MM

Added dts for describing the Emtop SOM-IMX8MM

Signed-off-by: Himanshu Bhavani <himanshu.bhavani at siliconsignals.io>

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 198fff3731ae..8f281c753e5a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop.dts
new file mode 100644
index 000000000000..5238a3b5f4cf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "FSL i.MX8MM Emtop SOM";
+	compatible = "fsl,imx8mm-emtop", "fsl,imx8mm-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		sys {
+			label = "sys";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic at 25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450";
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+
+			buck1: BUCK1 {
+				regulator-compatible = "BUCK1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-compatible = "BUCK2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3: BUCK3 {
+				regulator-compatible = "BUCK3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-compatible = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-compatible = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-compatible = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-compatible = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-compatible = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-compatible = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-compatible = "LDO4";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-compatible = "LDO5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <3600000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16			0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL				0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3			0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX			0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX			0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
-- 
2.25.1


More information about the linux-arm-kernel mailing list