[PATCH v2 2/2] dt-bindings: MFD: Convert STMPE to YAML schema
Rob Herring
robh at kernel.org
Thu Apr 27 09:16:33 PDT 2023
On Wed, Apr 26, 2023 at 01:21:39PM +0200, Linus Walleij wrote:
> This converts the STMPE MFD device tree bindings to the YAML
> schema.
>
> Reference the existing schema for the ADC, just define the
> other subnode schemas directly in the MFD schema.
>
> Add two examples so we have examples covering both the simple
> GPIO expander and the more complex with ADC and touchscreen.
>
> Some in-tree users do not follow the naming conventions for nodes
> so these DTS files need to be augmented to use proper node names
> like "adc", "pwm", "gpio", "keyboard-controller" etc before the
> bindings take effect on them.
>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v1->v2:
> - Split off the GPIO bindings to their own schema, as the old
> bindings didn't even have any GPIO bindings. Put the GPIO
> schema before this schema so we can use GPIO in the examples.
> - Drop nodename and pattern as STMPE is not a generic name.
> - Add maxItems to the resets.
> - Make wakeup-source just :true, as it is a generic property.
> - Move unevaluatedProperties for subnodes right before properties
> as requested.
> - Name devices "port-expander" in the examples.
> - Use lowercase hex in line init.
> ---
> .../devicetree/bindings/input/stmpe-keypad.txt | 41 ---
> .../bindings/input/touchscreen/stmpe.txt | 108 --------
> .../devicetree/bindings/mfd/st,stmpe.yaml | 298 +++++++++++++++++++++
> Documentation/devicetree/bindings/mfd/stmpe.txt | 42 ---
> 4 files changed, 298 insertions(+), 191 deletions(-)
> diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
> new file mode 100644
> index 000000000000..dd24ae2d5fb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
> @@ -0,0 +1,298 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectonics Port Expander (STMPE)
> +
> +description: STMicroelectronics Port Expander (STMPE) is a series of slow
> + bus controllers for various expanded peripherals such as GPIO, keypad,
> + touchscreen, ADC, PWM or rotator. It can contain one or several different
> + peripherals connected to SPI or I2C.
> +
> +maintainers:
> + - Linus Walleij <linus.walleij at linaro.org>
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - st,stmpe601
> + - st,stmpe801
> + - st,stmpe811
> + - st,stmpe1600
> + - st,stmpe1601
> + - st,stmpe2401
> + - st,stmpe2403
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + vcc-supply: true
> +
> + vio-supply: true
> +
> + reset-gpios:
> + maxItems: 1
> +
> + wakeup-source: true
> +
> + st,autosleep-timeout:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ]
> + description: Time idle before going to automatic sleep to save power
> +
> + st,sample-time:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3, 4, 5, 6 ]
> + description: |
> + Sample time per iteration
> + 0 = 36 clock ticks
> + 1 = 44 clock ticks
> + 2 = 56 clock ticks
> + 3 = 64 clock ticks
> + 4 = 80 clock ticks - recommended
> + 5 = 96 clock ticks
> + 6 = 124 clock ticks
> +
> + st,mod-12b:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC
> +
> + st,ref-sel:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description: ADC reference source 0 = internal, 1 = external
> +
> + st,adc-freq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3 ]
> + description: |
> + ADC clock speed
> + 0 = 1.625 MHz
> + 1 = 3.25 MHz
> + 2, 3 = 6.5 MHz
> +
> + adc:
> + type: object
> + $ref: /schemas/iio/adc/st,stmpe-adc.yaml#
> +
> + gpio:
> + type: object
> + $ref: /schemas/gpio/st,stmpe-gpio.yaml#
> +
> + keyboard-controller:
> + type: object
> + $ref: /schemas/input/matrix-keymap.yaml#
> +
> + unevaluatedProperties: false
> +
> + properties:
> + compatible:
> + const: st,stmpe-keypad
> +
> + debounce-interval:
> + description: Debouncing interval in milliseconds
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + st,no-autorepeat:
> + description: If present, the keys will not autorepeat when pressed
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,scan-count:
> + description: Scanning cycles elapsed before key data is updated
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + required:
> + - compatible
> + - linux,keymap
> +
> + pwm:
> + type: object
> + $ref: /schemas/pwm/pwm.yaml#
> +
> + unevaluatedProperties: false
> +
> + properties:
> + compatible:
> + const: st,stmpe-pwm
You need to define what value #pwm-cells should be.
> +
> + required:
> + - compatible
> + - "#pwm-cells"
pwm.yaml already requires this.
With those fixed,
Reviewed-by: Rob Herring <robh at kernel.org>
> +
> + touchscreen:
> + type: object
> + $ref: /schemas/input/touchscreen/touchscreen.yaml#
> +
> + unevaluatedProperties: false
> +
> + properties:
> + compatible:
> + const: st,stmpe-ts
> +
> + st,ave-ctrl:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3 ]
> + description: |
> + Sample average control
> + 0 = 1 sample
> + 1 = 2 samples
> + 2 = 4 samples
> + 3 = 8 samples
> +
> + st,touch-det-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
> + description: |
> + Touch detection delay
> + 0 = 10 us
> + 1 = 50 us
> + 2 = 100 us
> + 3 = 500 us - recommended
> + 4 = 1 ms
> + 5 = 5 ms
> + 6 = 10 ms
> + 7 = 50 ms
> +
> + st,settling:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
> + description: |
> + Panel driver settling time
> + 0 = 10 us
> + 1 = 100 us
> + 2 = 500 us - recommended
> + 3 = 1 ms
> + 4 = 5 ms
> + 5 = 10 ms
> + 6 = 50 ms
> + 7 = 100 ms
> +
> + st,fraction-z:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
> + description: Length of the fractional part in z, recommended is 7
> + (fraction-z ([0..7]) = Count of the fractional part)
> +
> + st,i-drive:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description: |
> + current limit value of the touchscreen drivers
> + 0 = 20 mA (typical 35 mA max)
> + 1 = 50 mA (typical 80 mA max)
> +
> + required:
> + - compatible
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/input/input.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port-expander at 43 {
> + compatible = "st,stmpe2401";
> + reg = <0x43>;
> + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
> + interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpio>;
> + vcc-supply = <&db8500_vsmps2_reg>;
> + vio-supply = <&db8500_vsmps2_reg>;
> + wakeup-source;
> + st,autosleep-timeout = <1024>;
> +
> + gpio {
> + compatible = "st,stmpe-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + st,norequest-mask = <0xf0f002>;
> + };
> +
> + keyboard-controller {
> + compatible = "st,stmpe-keypad";
> + debounce-interval = <64>;
> + st,scan-count = <8>;
> + st,no-autorepeat;
> + keypad,num-rows = <8>;
> + keypad,num-columns = <8>;
> + linux,keymap = <
> + MATRIX_KEY(0x00, 0x00, KEY_1)
> + MATRIX_KEY(0x00, 0x01, KEY_2)
> + MATRIX_KEY(0x00, 0x02, KEY_3)
> + MATRIX_KEY(0x00, 0x03, KEY_4)
> + MATRIX_KEY(0x00, 0x04, KEY_5)
> + MATRIX_KEY(0x00, 0x05, KEY_6)
> + MATRIX_KEY(0x00, 0x06, KEY_7)
> + MATRIX_KEY(0x00, 0x07, KEY_8)
> + MATRIX_KEY(0x00, 0x08, KEY_9)
> + MATRIX_KEY(0x00, 0x09, KEY_0)
> + >;
> + };
> +
> + pwm {
> + compatible = "st,stmpe-pwm";
> + #pwm-cells = <2>;
> + };
> + };
> +
> + port-expander at 41 {
> + compatible = "st,stmpe811";
> + reg = <0x41>;
> + interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-parent = <&gpio>;
> + st,adc-freq = <1>;
> + st,mod-12b = <1>;
> + st,ref-sel = <0>;
> + st,sample-time = <4>;
> +
> + adc {
> + compatible = "st,stmpe-adc";
> + st,norequest-mask = <0x0f>;
> + #io-channel-cells = <1>;
> + };
> +
> + gpio {
> + compatible = "st,stmpe-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pwm {
> + compatible = "st,stmpe-pwm";
> + #pwm-cells = <2>;
> + };
> +
> + touchscreen {
> + compatible = "st,stmpe-ts";
> + st,ave-ctrl = <3>;
> + st,touch-det-delay = <5>;
> + st,settling = <3>;
> + st,fraction-z = <7>;
> + st,i-drive = <1>;
> + };
> + };
> + };
> +...
More information about the linux-arm-kernel
mailing list