[PATCH 5/5] arm64: dts: ti: k3-j7200: Add bootph-pre-ram for u-boot

[Kumar, Udit]

Thanks Nishanth,

Thanks for review

On 4/26/2023 6:18 PM, Nishanth Menon wrote:
> On 16:02-20230426, Udit Kumar wrote:
>> Adding bootph-pre-ram property for pin mux needed by
>> uboot.
>>
>> [..]
>>   &main_pmx0 {
>>   	main_i2c0_pins_default: main-i2c0-pins-default {
>> +		bootph-pre-ram;
>>   		pinctrl-single,pins = <
>>   			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
>>   			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
>> -- 
>> 2.34.1
>>
> There are a bunch of other nodes that neeed bootph-pre-ram -> lets first
> ensure all the nodes needed for u-boot is present (esm is still in
> discussion) then add bootph-pre-ram and related ones in a follow on series.

sure, let's get esm and i2c (pmic one) get concluded,

after that will revisit this.