[PATCH 1/3] arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename

[Nishanth Menon]

unit-address should not use a 0x prefix.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 331b4e482e41..674e695ef844 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -62,7 +62,7 @@ wkup_pmx0: pinctrl at 4301c000 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx1: pinctrl at 0x4301c038 {
+	wkup_pmx1: pinctrl at 4301c038 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x8>;
@@ -71,7 +71,7 @@ wkup_pmx1: pinctrl at 0x4301c038 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx2: pinctrl at 0x4301c068 {
+	wkup_pmx2: pinctrl at 4301c068 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0xec>;
@@ -80,7 +80,7 @@ wkup_pmx2: pinctrl at 0x4301c068 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx3: pinctrl at 0x4301c174 {
+	wkup_pmx3: pinctrl at 4301c174 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c174 0x00 0x20>;
-- 
2.40.0