[PATCH 3/6] drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically

[Marek Szyprowski]

On 15.04.2023 12:41, Adam Ford wrote:
> Fetch the clock rate of "sclk_mipi" (or "pll_clk") instead of
> having an entry in the device tree for samsung,pll-clock-frequency.
>
> Signed-off-by: Adam Ford <aford173 at gmail.com>

This one breaks DSI panel operation on my Exynos-based Trats, Trats2 and 
TM2e boards. I've didn't check the details, but probably something is 
missing in the dts to make it working properly. Surprisingly the display 
is still working fine on Arndale board with DSI TC358764 bridge.

> ---
>   drivers/gpu/drm/bridge/samsung-dsim.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
> index 9fec32b44e05..73f0c3fbbdf5 100644
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1744,11 +1744,6 @@ static int samsung_dsim_parse_dt(struct samsung_dsim *dsi)
>   	struct device_node *node = dev->of_node;
>   	int ret;
>   
> -	ret = samsung_dsim_of_read_u32(node, "samsung,pll-clock-frequency",
> -				       &dsi->pll_clk_rate);
> -	if (ret < 0)
> -		return ret;
> -
>   	ret = samsung_dsim_of_read_u32(node, "samsung,burst-clock-frequency",
>   				       &dsi->burst_clk_rate);
>   	if (ret < 0)
> @@ -1823,13 +1818,18 @@ int samsung_dsim_probe(struct platform_device *pdev)
>   		if (IS_ERR(dsi->clks[i])) {
>   			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
>   				dsi->clks[i] = devm_clk_get(dev, OLD_SCLK_MIPI_CLK_NAME);
> -				if (!IS_ERR(dsi->clks[i]))
> +				if (!IS_ERR(dsi->clks[i])) {
> +					dsi->pll_clk_rate = clk_get_rate(dsi->clks[i]);
>   					continue;
> +				}
>   			}
>   
>   			dev_info(dev, "failed to get the clock: %s\n", clk_names[i]);
>   			return PTR_ERR(dsi->clks[i]);
>   		}
> +
> +		if (strcmp(clk_names[i], "sclk_mipi") == 0)
> +			dsi->pll_clk_rate = clk_get_rate(dsi->clks[i]);
>   	}
>   
>   	dsi->reg_base = devm_platform_ioremap_resource(pdev, 0);

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland