[PATCH 2/4] dt-bindings: net: can: Make interrupt attributes optional for MCAN

[Judith Mendez]

For MCAN, remove interrupt and interrupt names from the required
section.

On AM62x SoC, MCANs on MCU domain do not have hardware interrupt
routed to A53 Linux, instead they will use software interrupt
by hrtimer. Make interrupt attributes optional in MCAN node
by removing from required section.

Signed-off-by: Judith Mendez <jm at ti.com>
---
 Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index 67879aab623b..43f1aa9addc0 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -122,8 +122,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-names
   - clocks
   - clock-names
   - bosch,mram-cfg
-- 
2.17.1