[PATCH 2/5] arm64: dts: ti: k3-am65*: Drop bootargs

[Jan Kiszka]

On 18.04.23 18:52, Nishanth Menon wrote:
> Drop bootargs from the dts
> 

No reasoning provided, apparently also in the other patches of this
series. Given that these DTS here are not the last ones using bootargs
in upstream, that seems reasonable to state here.

Jan

> Cc: Jan Kiszka <jan.kiszka at siemens.com>
> Link: https://lore.kernel.org/linux-arm-kernel/81134eb9-2b7d-05bc-3035-a47f020861a8@linaro.org/
> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 1 -
>  arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 1 -
>  2 files changed, 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index 96ac2b476b11..7d256a1638ff 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -21,7 +21,6 @@ aliases {
>  
>  	chosen {
>  		stdout-path = "serial3:115200n8";
> -		bootargs = "earlycon=ns16550a,mmio32,0x02810000";
>  	};
>  
>  	reserved-memory {
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index 592ab2b54cb3..0d6fc89eba7a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -15,7 +15,6 @@ / {
>  
>  	chosen {
>  		stdout-path = "serial2:115200n8";
> -		bootargs = "earlycon=ns16550a,mmio32,0x02800000";
>  	};
>  
>  	memory at 80000000 {

-- 
Siemens AG, Technology
Competence Center Embedded Linux