[PATCH v3 4/5] arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node

[Jayesh Choudhary]

On 19/04/23 13:21, Krzysztof Kozlowski wrote:
> On 19/04/2023 08:17, Jayesh Choudhary wrote:
>> From: Rahul T R <r-ravikumar at ti.com>
>>
>> Add DSS and DP-bridge node for J784S4 SoC. DSS IP in J784S4 is
>> same as DSS IP in J721E, so same compatible is being used.
>> The DP is Cadence MHDP8546.
>>
>> Signed-off-by: Rahul T R <r-ravikumar at ti.com>
>> [j-choudhary at ti.com: move all k3-j784s4-main.dtsi changes together]
>> Signed-off-by: Jayesh Choudhary <j-choudhary at ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 77 ++++++++++++++++++++++
>>   1 file changed, 77 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> index 51aa476dedba..739741e93bc1 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> @@ -1373,4 +1373,81 @@ main_spi7: spi at 2170000 {
>>   		clocks = <&k3_clks 383 1>;
>>   		status = "disabled";
>>   	};
>> +
>> +	mhdp: dp-bridge at a000000 {
>> +		compatible = "ti,j721e-mhdp8546";
>> +
>> +		reg = <0x0 0xa000000 0x0 0x30a00>,
>> +		      <0x0 0x4f40000 0x0 0x20>;
>> +		reg-names = "mhdptx", "j721e-intg";
>> +
>> +		clocks = <&k3_clks 217 11>;
>> +
>> +		interrupt-parent = <&gic500>;
>> +		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
>> +
>> +		status = "disabled";
>> +
>> +		dp0_ports: ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +		};
>> +	};
>> +
>> +	dss: dss at 4a00000 {
>> +		compatible = "ti,j721e-dss";
>> +		reg =
>> +			<0x00 0x04a00000 0x00 0x10000>,
> 
> Fix indent/stray line break.
> 
>> +			<0x00 0x04a10000 0x00 0x10000>,
>> +			<0x00 0x04b00000 0x00 0x10000>,
>> +			<0x00 0x04b10000 0x00 0x10000>,
>> +
>> +			<0x00 0x04a20000 0x00 0x10000>,
>> +			<0x00 0x04a30000 0x00 0x10000>,
>> +			<0x00 0x04a50000 0x00 0x10000>,
>> +			<0x00 0x04a60000 0x00 0x10000>,
>> +
>> +			<0x00 0x04a70000 0x00 0x10000>,
>> +			<0x00 0x04a90000 0x00 0x10000>,
>> +			<0x00 0x04ab0000 0x00 0x10000>,
>> +			<0x00 0x04ad0000 0x00 0x10000>,
>> +
>> +			<0x00 0x04a80000 0x00 0x10000>,
>> +			<0x00 0x04aa0000 0x00 0x10000>,
>> +			<0x00 0x04ac0000 0x00 0x10000>,
>> +			<0x00 0x04ae0000 0x00 0x10000>,
>> +			<0x00 0x04af0000 0x00 0x10000>;
>> +
>> +		reg-names = "common_m", "common_s0",
>> +			"common_s1", "common_s2",
>> +			"vidl1", "vidl2","vid1","vid2",
>> +			"ovr1", "ovr2", "ovr3", "ovr4",
>> +			"vp1", "vp2", "vp3", "vp4",
>> +			"wb";
>> +
>> +		clocks =	<&k3_clks 218 0>,
> 
> Broken indentation.

Indentation at both places are similar to j721e dss node.
Changes are needed in both?

-Jayesh

> 
> 
> 
> Best regards,
> Krzysztof
>