[RFC PATCH 0/2] Baisc devicetree support for Amlogic C3

[=Xianwei Zhao]

From: Xianwei Zhao <xianwei.zhao at amlogic.com>

Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.

Add ARCH_AMLIPC for the new series.

Add basic devicetree support for the C3 based Amlogic AW409 board,
which describes the following components: CPU, GIC, IRQ, Timer, UART.
It's capable of booting up into the serial console.

Xianwei Zhao (2):
  arm64: amlogic: add new ARCH_AMLIPC for IPC SoC
  arm64: dts: add support for C3 based Amlogic AW409

 arch/arm64/Kconfig.platforms                  | 12 +++
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 30 +++++++
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 87 +++++++++++++++++++
 arch/arm64/configs/defconfig                  |  2 +
 5 files changed, 132 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi


base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
-- 
2.37.1