[PATCH 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices

Neha Malcom Francis n-francis at ti.com
Mon Apr 17 01:56:26 PDT 2023


Hi Krzysztof

On 14/04/23 17:10, Krzysztof Kozlowski wrote:
> On 14/04/2023 12:52, Neha Malcom Francis wrote:
>> Document the binding for TI K3 ESM (Error Signaling Module) block.
>>
>> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
>> ---
>>   .../devicetree/bindings/misc/esm-k3.yaml      | 54 +++++++++++++++++++
>>   1 file changed, 54 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/misc/esm-k3.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/misc/esm-k3.yaml b/Documentation/devicetree/bindings/misc/esm-k3.yaml
>> new file mode 100644
>> index 000000000000..5e637add3b0e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/esm-k3.yaml
> 
> Filename matching compatible. Missing vendor prefix and device name.
> 
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2022 Texas Instruments Incorporated
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/misc/esm-k3.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments K3 ESM Binding
> 
> Drop: Binding
> 
>> +
>> +maintainers:
>> +  - Neha Malcom Francis <n-francis at ti.com>
>> +
>> +description: |
>> +  The ESM (Error Signaling Module) is an IP block on TI K3 devices
>> +  that allows handling of safety events somewhat similar to what interrupt
>> +  controller would do. The safety signals have their separate paths within
>> +  the SoC, and they are handld by the ESM, which routes them to the proper
> 
> typo: handled
> 
>> +  destination, which can be system reset, interrupt controller, etc. In the
>> +  simplest configuration the signals are just routed to reset the SoC.
> 
> There is no proper bindings directory for ESM? Misc is discouraged.
> 

There is no other directory I see fit for a block like ESM; it could 
either remain in misc/ or maybe create a directory error/ for all error 
signaling and correction mechanisms? I see misc/xlnx,sd-fec.txt that 
could also go in error/

What do you think is fit?

>> +
>> +properties:
>> +  compatible:
>> +    const: ti,j721e-esm
>> +
>> +  reg:
>> +    items:
>> +      - description: physical address and length of the registers which
>> +          contain revision and debug features
> 
> Drop useless "physical address and length of the registers which". reg
> cannot be anything else.
> 
>> +      - description: physical address and length of the registers which
>> +          indicate strapping options
>> +
>> +  ti,esm-pins:
>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>> +    description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 
>> +      integer array of ESM event IDs to route to external event pin which can
>> +      be used to reset the SoC. The array can have an arbitrary amount of event
>> +      IDs listed on it.
> 
> What is ESM event ID? The property name suggests pins...
> 
> 
>> +    minItems: 1
>> +    maxItems: 255
>> +
>> +additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - ti,esm-pins
>> +
>> +examples:
>> +  - |
>> +    main_esm: esm at 700000 {
> 
> Drop label.
> 

Thanks for the reviews! I'll send v2 after we decide on the location.

>> +        compatible = "ti,j721e-esm";
>> +        reg = <0x0 0x700000 0x0 0x1000>;
>> +        ti,esm-pins = <344>, <345>;
>> +    };
> 
> Best regards,
> Krzysztof
> 

-- 
Thanking You
Neha Malcom Francis



More information about the linux-arm-kernel mailing list