[PATCH 6/7] dmaengine: ste_dma40: Use managed resources
Linus Walleij
linus.walleij at linaro.org
Mon Apr 17 00:55:51 PDT 2023
This switches the DMA40 driver to use a bunch of managed
resources and strip down the errorpath.
The result is pretty neat and makes the driver way more
readable.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
drivers/dma/ste_dma40.c | 180 ++++++++++++++++--------------------------------
1 file changed, 61 insertions(+), 119 deletions(-)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index fe98f12b8130..c5991009d3e4 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -554,8 +554,6 @@ struct d40_gen_dmac {
* @virtbase: The virtual base address of the DMA's register.
* @rev: silicon revision detected.
* @clk: Pointer to the DMA clock structure.
- * @phy_start: Physical memory start of the DMA registers.
- * @phy_size: Size of the DMA register map.
* @irq: The IRQ number.
* @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
* transfers).
@@ -599,8 +597,6 @@ struct d40_base {
void __iomem *virtbase;
u8 rev:4;
struct clk *clk;
- phys_addr_t phy_start;
- resource_size_t phy_size;
int irq;
int num_memcpy_chans;
int num_phy_chans;
@@ -3128,65 +3124,58 @@ static int __init d40_phy_res_init(struct d40_base *base)
return num_phy_chans_avail;
}
+/* Called from the registered devm action */
+static void d40_drop_kmem_cache_action(void *d)
+{
+ struct kmem_cache *desc_slab = d;
+
+ kmem_cache_destroy(desc_slab);
+}
+
static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
{
struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
struct clk *clk;
void __iomem *virtbase;
- struct resource *res;
struct d40_base *base;
int num_log_chans;
int num_phy_chans;
int num_memcpy_chans;
- int clk_ret = -EINVAL;
int i;
u32 pid;
u32 cid;
u8 rev;
+ int ret;
- clk = clk_get(dev, NULL);
- if (IS_ERR(clk)) {
- d40_err(dev, "No matching clock found\n");
- goto check_prepare_enabled;
- }
-
- clk_ret = clk_prepare_enable(clk);
- if (clk_ret) {
- d40_err(dev, "Failed to prepare/enable clock\n");
- goto disable_unprepare;
- }
+ clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(clk))
+ return NULL;
/* Get IO for DMAC base address */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
- if (!res)
- goto disable_unprepare;
-
- if (request_mem_region(res->start, resource_size(res),
- D40_NAME " I/O base") == NULL)
- goto release_region;
-
- virtbase = ioremap(res->start, resource_size(res));
- if (!virtbase)
- goto release_region;
+ virtbase = devm_platform_ioremap_resource_byname(pdev, "base");
+ if (IS_ERR(virtbase)) {
+ dev_err(dev, "No IO base defined\n");
+ return NULL;
+ }
/* This is just a regular AMBA PrimeCell ID actually */
for (pid = 0, i = 0; i < 4; i++)
- pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i)
+ pid |= (readl(virtbase + SZ_4K - 0x20 + 4 * i)
& 255) << (i * 8);
for (cid = 0, i = 0; i < 4; i++)
- cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i)
+ cid |= (readl(virtbase + SZ_4K - 0x10 + 4 * i)
& 255) << (i * 8);
if (cid != AMBA_CID) {
d40_err(dev, "Unknown hardware! No PrimeCell ID\n");
- goto unmap_io;
+ return NULL;
}
if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
d40_err(dev, "Unknown designer! Got %x wanted %x\n",
AMBA_MANF_BITS(pid),
AMBA_VENDOR_ST);
- goto unmap_io;
+ return NULL;
}
/*
* HW revision:
@@ -3200,7 +3189,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
rev = AMBA_REV_BITS(pid);
if (rev < 2) {
d40_err(dev, "hardware revision: %d is not supported", rev);
- goto unmap_io;
+ return NULL;
}
/* The number of physical channels on this HW */
@@ -3218,23 +3207,22 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
dev_info(dev,
- "hardware rev: %d @ %pa with %d physical and %d logical channels\n",
- rev, &res->start, num_phy_chans, num_log_chans);
+ "hardware rev: %d with %d physical and %d logical channels\n",
+ rev, num_phy_chans, num_log_chans);
- base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
- (num_phy_chans + num_log_chans + num_memcpy_chans) *
- sizeof(struct d40_chan), GFP_KERNEL);
+ base = devm_kzalloc(dev,
+ ALIGN(sizeof(struct d40_base), 4) +
+ (num_phy_chans + num_log_chans + num_memcpy_chans) *
+ sizeof(struct d40_chan), GFP_KERNEL);
- if (base == NULL)
- goto unmap_io;
+ if (!base)
+ return NULL;
base->rev = rev;
base->clk = clk;
base->num_memcpy_chans = num_memcpy_chans;
base->num_phy_chans = num_phy_chans;
base->num_log_chans = num_log_chans;
- base->phy_start = res->start;
- base->phy_size = resource_size(res);
base->virtbase = virtbase;
base->plat_data = plat_data;
base->dev = dev;
@@ -3271,76 +3259,55 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
}
- base->phy_res = kcalloc(num_phy_chans,
- sizeof(*base->phy_res),
- GFP_KERNEL);
+ base->phy_res = devm_kcalloc(dev, num_phy_chans,
+ sizeof(*base->phy_res),
+ GFP_KERNEL);
if (!base->phy_res)
- goto free_base;
+ return NULL;
- base->lookup_phy_chans = kcalloc(num_phy_chans,
- sizeof(*base->lookup_phy_chans),
- GFP_KERNEL);
+ base->lookup_phy_chans = devm_kcalloc(dev, num_phy_chans,
+ sizeof(*base->lookup_phy_chans),
+ GFP_KERNEL);
if (!base->lookup_phy_chans)
- goto free_phy_res;
+ return NULL;
- base->lookup_log_chans = kcalloc(num_log_chans,
- sizeof(*base->lookup_log_chans),
- GFP_KERNEL);
+ base->lookup_log_chans = devm_kcalloc(dev, num_log_chans,
+ sizeof(*base->lookup_log_chans),
+ GFP_KERNEL);
if (!base->lookup_log_chans)
- goto free_phy_chans;
+ return NULL;
- base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans,
+ base->reg_val_backup_chan = devm_kmalloc_array(dev, base->num_phy_chans,
sizeof(d40_backup_regs_chan),
GFP_KERNEL);
if (!base->reg_val_backup_chan)
- goto free_log_chans;
+ return NULL;
- base->lcla_pool.alloc_map = kcalloc(num_phy_chans
+ base->lcla_pool.alloc_map = devm_kcalloc(dev, num_phy_chans
* D40_LCLA_LINK_PER_EVENT_GRP,
sizeof(*base->lcla_pool.alloc_map),
GFP_KERNEL);
if (!base->lcla_pool.alloc_map)
- goto free_backup_chan;
+ return NULL;
- base->regs_interrupt = kmalloc_array(base->gen_dmac.il_size,
+ base->regs_interrupt = devm_kmalloc_array(dev, base->gen_dmac.il_size,
sizeof(*base->regs_interrupt),
GFP_KERNEL);
if (!base->regs_interrupt)
- goto free_map;
+ return NULL;
base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
0, SLAB_HWCACHE_ALIGN,
NULL);
- if (base->desc_slab == NULL)
- goto free_regs;
+ if (!base->desc_slab)
+ return NULL;
+ ret = devm_add_action_or_reset(dev, d40_drop_kmem_cache_action,
+ base->desc_slab);
+ if (ret)
+ return NULL;
return base;
- free_regs:
- kfree(base->regs_interrupt);
- free_map:
- kfree(base->lcla_pool.alloc_map);
- free_backup_chan:
- kfree(base->reg_val_backup_chan);
- free_log_chans:
- kfree(base->lookup_log_chans);
- free_phy_chans:
- kfree(base->lookup_phy_chans);
- free_phy_res:
- kfree(base->phy_res);
- free_base:
- kfree(base);
- unmap_io:
- iounmap(virtbase);
- release_region:
- release_mem_region(res->start, resource_size(res));
- check_prepare_enabled:
- if (!clk_ret)
- disable_unprepare:
- clk_disable_unprepare(clk);
- if (!IS_ERR(clk))
- clk_put(clk);
- return NULL;
}
static void __init d40_hw_init(struct d40_base *base)
@@ -3585,11 +3552,11 @@ static int __init d40_probe(struct platform_device *pdev)
} else
writel(base->phy_lcpa, base->virtbase + D40_DREG_LCPA);
- base->lcpa_base = ioremap(base->phy_lcpa, base->lcpa_size);
+ base->lcpa_base = devm_ioremap(dev, base->phy_lcpa, base->lcpa_size);
if (!base->lcpa_base) {
ret = -ENOMEM;
d40_err(dev, "Failed to ioremap LCPA region\n");
- goto release_base;
+ goto report_failure;
}
/* If lcla has to be located in ESRAM we don't need to allocate */
if (base->plat_data->use_esram_lcla) {
@@ -3599,14 +3566,14 @@ static int __init d40_probe(struct platform_device *pdev)
ret = -ENOENT;
d40_err(dev,
"No \"lcla_esram\" memory resource\n");
- goto destroy_cache;
+ goto report_failure;
}
- base->lcla_pool.base = ioremap(res->start,
- resource_size(res));
+ base->lcla_pool.base = devm_ioremap(dev, res->start,
+ resource_size(res));
if (!base->lcla_pool.base) {
ret = -ENOMEM;
d40_err(dev, "Failed to ioremap LCLA region\n");
- goto destroy_cache;
+ goto report_failure;
}
writel(res->start, base->virtbase + D40_DREG_LCLA);
@@ -3678,16 +3645,8 @@ static int __init d40_probe(struct platform_device *pdev)
dev_info(base->dev, "initialized\n");
return 0;
- destroy_cache:
- kmem_cache_destroy(base->desc_slab);
- if (base->virtbase)
- iounmap(base->virtbase);
-
- if (base->lcla_pool.base && base->plat_data->use_esram_lcla) {
- iounmap(base->lcla_pool.base);
- base->lcla_pool.base = NULL;
- }
+ destroy_cache:
if (base->lcla_pool.dma_addr)
dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
SZ_1K * base->num_phy_chans,
@@ -3699,28 +3658,11 @@ static int __init d40_probe(struct platform_device *pdev)
kfree(base->lcla_pool.base_unaligned);
- if (base->lcpa_base)
- iounmap(base->lcpa_base);
-
-release_base:
- if (base->phy_start)
- release_mem_region(base->phy_start,
- base->phy_size);
- if (base->clk) {
- clk_disable_unprepare(base->clk);
- clk_put(base->clk);
- }
-
if (base->lcpa_regulator) {
regulator_disable(base->lcpa_regulator);
regulator_put(base->lcpa_regulator);
}
- kfree(base->lcla_pool.alloc_map);
- kfree(base->lookup_log_chans);
- kfree(base->lookup_phy_chans);
- kfree(base->phy_res);
- kfree(base);
report_failure:
d40_err(dev, "probe failed\n");
return ret;
--
2.39.2
More information about the linux-arm-kernel
mailing list