[PATCH 1/7] dt-bindings: dma: dma40: Prefer to pass sram through phandle

[Linus Walleij]

Extend the DMA40 bindings so that we can pass two SRAM
segments as phandles instead of directly referring to the
memory address in the second reg cell. This enables more
granular control over the SRAM, and adds the optiona LCLA
SRAM segment as well.

Deprecate the old way of passing LCPA as a second reg cell,
make sram compulsory.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 .../devicetree/bindings/dma/stericsson,dma40.yaml  | 35 +++++++++++++++++-----
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
index 64845347f44d..4fe0df937171 100644
--- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -112,14 +112,23 @@ properties:
       - const: stericsson,dma40
 
   reg:
-    items:
-      - description: DMA40 memory base
-      - description: LCPA memory base
+    oneOf:
+      - items:
+          - description: DMA40 memory base
+      - items:
+          - description: DMA40 memory base
+          - description: LCPA memory base, deprecated, use eSRAM pool instead
+        deprecated: true
+
 
   reg-names:
-    items:
-      - const: base
-      - const: lcpa
+    oneOf:
+      - items:
+          - const: base
+      - items:
+          - const: base
+          - const: lcpa
+        deprecated: true
 
   interrupts:
     maxItems: 1
@@ -127,6 +136,14 @@ properties:
   clocks:
     maxItems: 1
 
+  sram:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 2
+    description:
+      List of phandles for the SRAM used by the DMA40 block, the first
+      phandle is the LCPA memory, the second is the LCLA memory.
+
   memcpy-channels:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Array of u32 elements indicating which channels on the DMA
@@ -138,6 +155,7 @@ required:
   - reg
   - interrupts
   - clocks
+  - sram
   - memcpy-channels
 
 additionalProperties: false
@@ -149,8 +167,9 @@ examples:
     #include <dt-bindings/mfd/dbx500-prcmu.h>
     dma-controller at 801c0000 {
         compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-        reg = <0x801c0000 0x1000>, <0x40010000 0x800>;
-        reg-names = "base", "lcpa";
+        reg = <0x801c0000 0x1000>;
+        reg-names = "base";
+        sram = <&lcpa>, <&lcla>;
         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
         #dma-cells = <3>;
         memcpy-channels = <56 57 58 59 60>;

-- 
2.39.2