[PATCH 2/2] arm64: dts: ti: k3-j7200-common-proc-board: Enable I2C

[Udit Kumar]

All I2C nodes were disabled in SOC dts file and in board
dts needed nodes were enabled.
This patch enables wkup_i2c0 node in board dts file.

Fixes: a9ed915cd55c ("arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level")

Signed-off-by: Udit Kumar <u-kumar1 at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 63633e4f6c59..e66bbfe65ff2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,6 +254,10 @@ exp3: gpio at 20 {
 	};
 };
 
+&wkup_i2c0 {
+	status = "okay";
+};
+
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
-- 
2.34.1