[PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device

[Florian Fainelli]

On 4/13/2023 7:39 AM, Cyril Brulebois wrote:
> Hi Jim,
> 
> Jim Quinlan <jim2101024 at gmail.com> (2023-04-11):
>> […]
>> This property has already been in use by Raspian Linux, but this
>> immplementation adds more details and discerns between (a) and (b)
>    ^^^^^^^^^^^^^^^
>    implementation
> 
>> automatically.
>>
>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
>> Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
> 
> Sorry, it seems like my initial tests with v1 (applied on top of
> v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
> same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
>   - same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
>   - the kernel panic is indeed gone;
>   - a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
>     isn't seen by the kernel;
>   - a USB memory stick connected on the same adapter isn't seen by the
>     kernel either;
>   - of course both USB devices are confirmed to work fine if they're
>     plugged directly on the CM4's USB ports.
> 
> Logs with v2:
> 
>      root at cm4:~# dmesg|grep -i pci
>      [    0.610997] PCI: CLS 0 bytes, default 64
>      [    1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>      [    1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie at 7d500000 ranges:
>      [    1.679125] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie at 7d500000, using [bus 00-ff]
>      [    1.688279] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
>      [    1.696463] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
>      [    1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
>      [    1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
>      [    1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
>      [    1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
>      [    1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
>      [    1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>      [    1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
>      [    1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
>      [    1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
>      [    1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
>      [    1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
>      [    1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
>      [    1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
>      [    1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
>      [    1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
>      [    1.915293] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
>      [    1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
>      [    1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
>      [    1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
>      [    1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
>      [    6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
>      [    6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
> 
> Please let me know what I can do to help.

Could you please attach your .config so we can check a few things?
-- 
Florian