[PATCH v3 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node

[Konrad Dybcio]

On 11.04.2023 16:41, Bartosz Golaszewski wrote:
> On Tue, Apr 11, 2023 at 3:16 PM Konrad Dybcio <konrad.dybcio at linaro.org> wrote:
>>
>>
>>
>> On 11.04.2023 14:59, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
>>>
>>> Add the Adreno GPU IOMMU for sa8775p-based platforms.
>>>
>>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
>>> ---
>>>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 37 +++++++++++++++++++++++++++
>>>  1 file changed, 37 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> index 191b510b5a1a..11f3d80dd869 100644
>>> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> @@ -7,6 +7,7 @@
>>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>  #include <dt-bindings/clock/qcom,rpmh.h>
>>>  #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>>> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>>>  #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>>>  #include <dt-bindings/power/qcom-rpmpd.h>
>>>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> @@ -605,6 +606,42 @@ gpucc: clock-controller at 3d90000 {
>>>                       #power-domain-cells = <1>;
>>>               };
>>>
>>> +             adreno_smmu: iommu at 3da0000 {
>>> +                     compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
>>> +                                  "arm,mmu-500";
>> Err.. does it even boot like this? You dropped the qcom,smmu-500 compatible
>> which means it's getting bound to the generic SMMU driver (without
>> QC quirks). If that was a mistake, you should have had all 4
>>
>> "qcom,sa8775p-smmu-500", qcom,adreno-smmu, "qcom,smmu-500", "arm,mmu-500"
>>
>> Without falling into the qc-specific codepaths, the Adreno compat does
>> nothing.
>>
> 
> I did that initially, then noticed dtbs_check fails because the
> existing adreno GPUs implementing "arm,smmu-500" expect three
> compatibles like in this commit. I did that and the driver still
> probed the same so I assumed all's good. You're right of course, the
> adreno impl is not being assigned without "qcom,smmu-500". Are the
> bindings wrong in this case and should it be something like the
> following?
> 
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> index d966dc65ce10..cd1b052a7242 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> @@ -84,6 +84,7 @@ properties:
>                - qcom,sm8150-smmu-500
>                - qcom,sm8250-smmu-500
>            - const: qcom,adreno-smmu
> +          - const: qcom,smmu-500
>            - const: arm,mmu-500
>        - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
>          items:
> 
> Bartosz
Check

https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/commit/?h=for-joerg/arm-smmu/bindings&id=5c3686616b1840b3143b227eb58fb1c1621d204e

Konrad
> 
>> Konrad
>>> +                     reg = <0x0 0x03da0000 0x0 0x20000>;
>>> +                     #iommu-cells = <2>;
>>> +                     #global-interrupts = <2>;
>>> +                     dma-coherent;
>>> +                     power-domains = <&gpucc GPU_CC_CX_GDSC>;
>>> +                     clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>>> +                              <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
>>> +                              <&gpucc GPU_CC_AHB_CLK>,
>>> +                              <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
>>> +                              <&gpucc GPU_CC_CX_GMU_CLK>,
>>> +                              <&gpucc GPU_CC_HUB_CX_INT_CLK>,
>>> +                              <&gpucc GPU_CC_HUB_AON_CLK>;
>>> +                     clock-names = "gcc_gpu_memnoc_gfx_clk",
>>> +                                   "gcc_gpu_snoc_dvm_gfx_clk",
>>> +                                   "gpu_cc_ahb_clk",
>>> +                                   "gpu_cc_hlos1_vote_gpu_smmu_clk",
>>> +                                   "gpu_cc_cx_gmu_clk",
>>> +                                   "gpu_cc_hub_cx_int_clk",
>>> +                                   "gpu_cc_hub_aon_clk";
>>> +                     interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
>>> +                                  <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
>>> +             };
>>> +
>>>               pdc: interrupt-controller at b220000 {
>>>                       compatible = "qcom,sa8775p-pdc", "qcom,pdc";
>>>                       reg = <0x0 0x0b220000 0x0 0x30000>,