[PATCH v2] PCI: imx6: Save and restore MSI control of RC in suspend and resume
Hongxing Zhu
hongxing.zhu at nxp.com
Sun Apr 9 23:48:48 PDT 2023
> -----Original Message-----
> From: Lorenzo Pieralisi <lpieralisi at kernel.org>
> Sent: 2023年4月5日 23:56
> To: Hongxing Zhu <hongxing.zhu at nxp.com>
> Cc: Bjorn Helgaas <helgaas at kernel.org>; l.stach at pengutronix.de;
> bhelgaas at google.com; linux-pci at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> kernel at pengutronix.de; dl-linux-imx <linux-imx at nxp.com>; Serge Semin
> <Sergey.Semin at baikalelectronics.ru>
> Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI control of RC in suspend
> and resume
>
> [+Cc Sergey]
>
> On Mon, Mar 27, 2023 at 12:22:04AM +0000, Hongxing Zhu wrote:
> > > -----Original Message-----
> > > From: Lorenzo Pieralisi <lpieralisi at kernel.org>
> > > Sent: 2023年3月24日 23:59
> > > To: Hongxing Zhu <hongxing.zhu at nxp.com>
> > > Cc: Bjorn Helgaas <helgaas at kernel.org>; l.stach at pengutronix.de;
> > > bhelgaas at google.com; linux-pci at vger.kernel.org;
> > > linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> > > kernel at pengutronix.de; dl-linux-imx <linux-imx at nxp.com>
> > > Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI control of
> > > RC in suspend and resume
> > >
> > > On Mon, Mar 20, 2023 at 07:02:35AM +0000, Hongxing Zhu wrote:
> > > > > -----Original Message-----
> > > > > From: Bjorn Helgaas <helgaas at kernel.org>
> > > > > Sent: 2023年3月18日 6:25
> > > > > To: Hongxing Zhu <hongxing.zhu at nxp.com>
> > > > > Cc: Lorenzo Pieralisi <lpieralisi at kernel.org>;
> > > > > l.stach at pengutronix.de; bhelgaas at google.com;
> > > > > linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> > > > > linux-kernel at vger.kernel.org; kernel at pengutronix.de;
> > > > > dl-linux-imx <linux-imx at nxp.com>
> > > > > Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI control
> > > > > of RC in suspend and resume
> > > > >
> > > > > On Fri, Mar 17, 2023 at 07:38:02AM +0000, Hongxing Zhu wrote:
> > > > > > > -----Original Message-----
> > > > > > > From: Lorenzo Pieralisi <lpieralisi at kernel.org>
> > > > > > > Sent: 2023年3月16日 16:11
> > > > > > > To: Hongxing Zhu <hongxing.zhu at nxp.com>
> > > > > > > Cc: Bjorn Helgaas <helgaas at kernel.org>;
> > > > > > > l.stach at pengutronix.de; bhelgaas at google.com;
> > > > > > > linux-pci at vger.kernel.org;
> > > > > > > linux-arm-kernel at lists.infradead.org;
> > > > > > > linux-kernel at vger.kernel.org; kernel at pengutronix.de;
> > > > > > > dl-linux-imx <linux-imx at nxp.com>
> > > > > > > Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI
> > > > > > > control of RC in suspend and resume
> > > > > > >
> > > > > > > On Thu, Mar 16, 2023 at 07:37:41AM +0000, Hongxing Zhu wrote:
> > > > > > >
> > > > > > > [...]
> > > > > > >
> > > > > > > > > > > > It's not a separate register.
> > > > > > > > > > > >
> > > > > > > > > > > > The bit I manipulated is the MSI Enable bit of the
> > > > > > > > > > > > Message Control Register for MSI (Offset 02h)
> > > > > > > > > > > > contained in the MSI-capability of Root Complex.
> > > > > > > > > > > >
> > > > > > > > > > > > In addition, on i.MX6, the MSI Enable bit controls
> > > > > > > > > > > > delivery of MSI interrupts from components below the Root
> Port.
> > > > > > > > > > > >
> > > > > > > > > > > > So, set MSI Enable in imx6q-pcie to let the MSI
> > > > > > > > > > > > from downstream components works.
> > > > > > > > > > >
> > > > > > > > > > > My confusion is about this "MSI Capability" found by
> > > > > > > > > > > "dw_pcie_find_capability(pci, PCI_CAP_ID_MSI)" in your patch.
> > > > > > > > > > >
> > > > > > > > > > > The i.MX6 manual might refer to that as an "MSI Capability"
> > > > > > > > > > > but as far as I know, the PCIe base spec doesn't
> > > > > > > > > > > document a Root Complex MSI
> > > > > > > > > Capability.
> > > > > > > > > > >
> > > > > > > > > > > I don't think it's the same as the one documented in
> > > > > > > > > > > PCIe r6.0, sec 7.7.2. I think it's different because:
> > > > > > > > > > >
> > > > > > > > > > > (1) I *think* "pci" here refers to the RC, not to a Root Port.
> > > > > > > > > > >
> > > > > > > > > > > (2) The semantics are different. The MSI-X Enable
> > > > > > > > > > > bit in 7.7.2
> > > only
> > > > > > > > > > > determines whether the Function itself is
> > > > > > > > > > > permitted to use
> > > MSI-X.
> > > > > > > > > > > It has nothing to do with devices *below* a Root
> > > > > > > > > > > Port can use
> > > > > > > MSI-X.
> > > > > > > > > > > It also has nothing to do with whether a Root Port
> > > > > > > > > > > can forward
> > > MSI
> > > > > > > > > > > transactions from those downstream devices.
> > > > > > > > > > >
> > > > > > > > > > > This part of my confusion could be easily resolved via a
> comment.
> > > > > > > > > > >
> > > > > > > > > > > I do have a follow-on question, though: the patch
> > > > > > > > > > > seems to enable MSI-related functionality using a
> > > > > > > > > > > register in the DesignWare IP, not something in the
> > > > > > > > > > > i.MX6-specific IP. If that's true, why don't other
> > > > > > > > > > > DesignWare-based drivers need something
> > > > > > > similar?
> > > > > > > > > > Hi Bjorn:
> > > > > > > > > > Thanks a lot for you reply.
> > > > > > > > > > This behavior is specific for i.MX PCIe.
> > > > > > > > >
> > > > > > > > > Which behaviour ? It can't be the root port MSI
> > > > > > > > > capability, that would be a HW bug (ie disabling root
> > > > > > > > > port MSIs would imply disabling MSIs for all downstream
> components).
> > > > > > > > >
> > > > > > > >
> > > > > > > > i.MX PCIe designer use this MSI_EN bit to control the MSI
> > > > > > > > trigger when integrate Design Ware PCIe IP.
> > > > > > > > Without the MSI_EN bit assertion (1b'1), the devices below
> > > > > > > > this RC can't trigger the MSI successfully.
> > > > > > > > Yes, you're right. It should not be the root port MSI capability.
> > > > > > >
> > > > > > > The question is, it is or it is not the root port MSI capability ?
> > > > > > >
> > > > > > > If it is, that's a HW bug.
> > > > > > >
> > > > > > > If it is not there is nothing to do and this patch can be merged.
> > > > > > Hi Lorenzo:
> > > > > > Thanks for your reply.
> > > > > > I think it is not the root port MSI capability actually.
> > > > > > Refer to my understands, designer just use the msi_en bit to
> > > > > > control the delivery of MSI interrupts from components below
> > > > > > the Root
> > > Port.
> > > > > > >
> > > > > > > > > > i.MX PCIe designer use this MSI_EN bit to control the
> > > > > > > > > > MSI trigger when integrate Design Ware PCIe IP.
> > > > > > > > >
> > > > > > > > > Fair enough but that can't be the MSI Enable bit in the
> > > > > > > > > Root Port MSI capability "Message Control" field I am afraid.
> > > > > > > > >
> > > > > > > > > It is what Bjorn mentioned quite clearly, a root complex
> > > > > > > > > configuration register dressed as an MSI capability, the
> > > > > > > > > root complex is not a PCI device; either that or that's an HW bug.
> > > > > > > > Yes, it is. I agree with you. Had report this situation to the design
> team.
> > > > > > > > Hope to correct this bug in HW design if it's possible.
> > > > > > >
> > > > > > > I don't understand if it is a HW bug or not, see above. I
> > > > > > > think it is legitimate to have MMIO register space that
> > > > > > > *looks* like an MSI capability for the root complex to
> > > > > > > control delivery of MSI interrupts, as long as it is not the
> > > > > > > actual root port MSI capability, in the root port PCI config
> > > > > > > space in which case this would be a HW
> > > > > bug from what you are reporting.
> > > > > > I just provide the following suggestions.
> > > > > > - Root complex shouldn't have the MSI capability refer to the PCIe Spec
> > > > > > 7.7.1 chapter.
> > > > > > - Root port MSIs should not imply disabling MSIs for all
> > > > > > downstream
> > > > > components.
> > > > >
> > > > > I think this is all a lot of confusion, mostly on my part, sorry about that.
> > > > >
> > > > > Root Complex configuration and behavior is not specified by the
> > > > > PCIe spec, so that's completely up to the i.MX designer. It's
> > > > > fine for the Root Complex to have an MSI Capability, and it's
> > > > > fine for that capability to enable/disable the RC fielding of
> > > > > MSI MemWr transactions from downstream devices and triggering MSI
> interrupts.
> > > > >
> > > > > It's also fine for the RC MSI Capability to be identified with a
> > > > > Capability ID of 0x5, although it is slightly confusing to use
> > > > > PCI_CAP_ID_MSI to find it. It's also slightly confusing to use
> > > > > the
> > > PCI_MSI_FLAGS offset into the RC MSI Capability.
> > > > >
> > > > > Using the PCI_CAP_ID_MSI, PCI_MSI_FLAGS, and
> > > > > PCI_MSI_FLAGS_ENABLE macros suggests to the reader that this RC
> > > > > MSI capability is the same as the the MSI Capability defined by PCIe r6.0,
> sec 7.7.1.
> > > > > Obviously it is *not* the same, because we're talking about a
> > > > > *Root
> > > > > Complex* capability, while the sec 7.7.1 capability can only
> > > > > appear on PCIe functions (Root Ports, Endpoints, Switch Ports, etc).
> > > > >
> > > > > I suggest a comment to the effect that this is a Root Complex
> > > > > MSI Capability, not the MSI Capability defined by PCIe r6.0, sec 7.7.1.
> > > > >
> > > > > Possibly even add new #defines in pci-imx6.c with different
> > > > > names, even though the values happen to be the same as the
> > > > > PCI_MSI_* #defines. That would be a convenient place to put a
> > > > > comment about what
> > > they are.
> > > > Hi Bjorn:
> > > > Thanks a lot for your dispelling doubts.
> > > > How about to add the following comments in the new add function to
> clarify it?
> > > >
> > > > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > > > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > > > @@ -1036,6 +1036,18 @@ static void pci_imx_set_msi_en(struct
> > > > dw_pcie
> > > *pci)
> > > > u8 offset;
> > > > u16 val;
> > > >
> > > > + /*
> > > > + * When i.MX DM PCIe controller is configured as RC mode, it has
> one
> > > > + * MSI Capability Structure, although PCIe r6.0, sec 7.7.1 doesn't
> > > > + * specify the MSI Capability Structures for Root Complex.
> > >
> > > That's because a PCI root complex is not a PCI device (and this is
> > > not an MSI capability, which lives in PCI config space).
> > >
> > > I will reword it (and the commit log with it) and merge it in the
> > > coming weeks for
> > > v6.4
> > Hi Lorenzo:
> > Thanks a lot for your kindly help.
>
> I am getting back to this since I am still not convinced and I want to understand
> this once for all.
>
> We do use dw_pcie_find_capability() in most DWC drivers to find and peek/poke
> at eg PCI express capability of the *Root port* (?),
>
> eg dw_pcie_wait_for_link()
>
> so I assume that for iMX6 dw_pcie_find_capability() does just the same, which
> would mean that we are poking the "Message Control" field of the Root port MSI
> capability.
>
> Either that (which would mean that iMX6 has a HW bug because the RP Message
> Control field does not control the delivery of MSIs from endpoints but just for the
> root port itself ) or all DWC controllers modelled the root complex MMIO space as
> a set of PCI/PCIe capabilities that are NOT necessarily mappable to PCI
> specifications defined ones.
>
> Can anyone please shed some light on this ? I don't have DWC HW, we need to
> know before merging this code.
Hi Lorenzo:
Regarding my understanding, DWC HW has the PCI/PCIe capability map when
it works in RC mode and Spec doesn’t specify these Caps for host controller.
And, there are comments describe these callbacks already in pcie-designware.c.
...
/*
* These interfaces resemble the pci_find_*capability() interfaces, but these
* are for configuring host controllers, which are bridges *to* PCI devices but
* are not PCI devices themselves.
*/
static u8 __dw_pcie_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
u8 cap)
...
Best Regards
Richard Zhu
>
> Thanks,
> Lorenzo
>
> >
> > Best Regards
> > Richard Zhu
> > >
> > > Thanks,
> > > Lorenzo
> > >
> > > > + *
> > > > + * The MSI_EN bit of MSI control register contained in this
> MSI-CAP
> > > > + * is used control the MSI delivery of MSI interrupts from
> components
> > > > + * below the Root Port.
> > > > + *
> > > > + * Find it by PCI_CAP_ID_MSI here, and assert the MSI_EN
> > > > + bit to
> > > allow
> > > > + * the MSI delivery below the Root Port, if the PCI MSI is enabled.
> > > > + */
> > > > if (pci_msi_enabled()) {
> > > > offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
> > > > dw_pcie_dbi_ro_wr_en(pci); Best Regards Richard
> > > > Zhu
> > > > >
> > > > > Bjorn
More information about the linux-arm-kernel
mailing list