[PATCH v2 1/3] thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister

[Daniel Lezcano]

Hi,

it seems like the remaining patches of the previous series does not 
raise feedbacks, I assume they are fine.

If nobody raises concern about it after this week-end, they will be 
applied to candidate for linux-next

Thanks
   -- Daniel


On 04/04/2023 09:51, Daniel Lezcano wrote:
> The driver is using the devm_thermal_of_zone_device_register().
> 
> In the error path of the function calling
> devm_thermal_of_zone_device_register(), the function
> devm_thermal_of_zone_unregister() should be called instead of
> thermal_of_zone_unregister(), otherwise this one will be called twice
> when the device is freed.
> 
> The same happens for the remove function where the devm_ guarantee the
> thermal_of_zone_unregister() will be called, so adding this call in
> the remove function will lead to a double free also.
> 
> Use devm_ variant in the error path of the probe function.
> 
> Remove thermal_of_zone_unregister() in the remove function.
> 
> Cc: Florian Fainelli <f.fainelli at gmail.com>
> Cc: Ray Jui <rjui at broadcom.com>
> Cc: Scott Branden <sbranden at broadcom.com>
> Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
> ---
>     V2:
>       - Fixed wrong label call on the error path
> ---
>   drivers/thermal/broadcom/bcm2835_thermal.c | 4 +---
>   1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
> index a217d832f24e..3acc9288b310 100644
> --- a/drivers/thermal/broadcom/bcm2835_thermal.c
> +++ b/drivers/thermal/broadcom/bcm2835_thermal.c
> @@ -275,7 +275,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
>   
>   	return 0;
>   err_tz:
> -	thermal_of_zone_unregister(tz);
> +	devm_thermal_of_zone_unregister(&pdev->dev, tz);
>   err_clk:
>   	clk_disable_unprepare(data->clk);
>   
> @@ -285,10 +285,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
>   static int bcm2835_thermal_remove(struct platform_device *pdev)
>   {
>   	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
> -	struct thermal_zone_device *tz = data->tz;
>   
>   	debugfs_remove_recursive(data->debugfsdir);
> -	thermal_of_zone_unregister(tz);
>   	clk_disable_unprepare(data->clk);
>   
>   	return 0;

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog