[PATCH] arm64: dts: marvell: align thermal node names with bindings

[Gregory CLEMENT]

Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> writes:

> Bindings expect thermal node names to end with '-thermal':
>
>   armada-8040-db.dtb: thermal-zones: 'ap-thermal-cpu0', ... do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'

Applied on mvebu/dt64

Thanks,

Gregory


>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
>  arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 10 +++++-----
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |  2 +-
>  2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> index 4e6d29ad32eb..2c920e22cec2 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
> @@ -317,7 +317,7 @@ ap_thermal: thermal-sensor at 80 {
>  	 * first one that will have a critical trip point will be chosen.
>  	 */
>  	thermal-zones {
> -		ap_thermal_ic: ap-thermal-ic {
> +		ap_thermal_ic: ap-ic-thermal {
>  			polling-delay-passive = <0>; /* Interrupt driven */
>  			polling-delay = <0>; /* Interrupt driven */
>  
> @@ -334,7 +334,7 @@ ap_crit: ap-crit {
>  			cooling-maps { };
>  		};
>  
> -		ap_thermal_cpu0: ap-thermal-cpu0 {
> +		ap_thermal_cpu0: ap-cpu0-thermal {
>  			polling-delay-passive = <1000>;
>  			polling-delay = <1000>;
>  
> @@ -367,7 +367,7 @@ map0_emerg: map0-ermerg {
>  			};
>  		};
>  
> -		ap_thermal_cpu1: ap-thermal-cpu1 {
> +		ap_thermal_cpu1: ap-cpu1-thermal {
>  			polling-delay-passive = <1000>;
>  			polling-delay = <1000>;
>  
> @@ -400,7 +400,7 @@ map1_emerg: map1-emerg {
>  			};
>  		};
>  
> -		ap_thermal_cpu2: ap-thermal-cpu2 {
> +		ap_thermal_cpu2: ap-cpu2-thermal {
>  			polling-delay-passive = <1000>;
>  			polling-delay = <1000>;
>  
> @@ -433,7 +433,7 @@ map2_emerg: map2-emerg {
>  			};
>  		};
>  
> -		ap_thermal_cpu3: ap-thermal-cpu3 {
> +		ap_thermal_cpu3: ap-cpu3-thermal {
>  			polling-delay-passive = <1000>;
>  			polling-delay = <1000>;
>  
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 7d0043824f2a..0cc9ee9871e7 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> @@ -25,7 +25,7 @@ / {
>  	 * The cooling maps are empty as there are no cooling devices.
>  	 */
>  	thermal-zones {
> -		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
> +		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
>  			polling-delay-passive = <0>; /* Interrupt driven */
>  			polling-delay = <0>; /* Interrupt driven */
>  
> -- 
> 2.34.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com