[PATCH 3/5] dt-bindings: reset: Add binding constants for BLZP1600

[Krzysztof Kozlowski]

On 06/04/2023 12:22, Niko Pasaloukos wrote:
> Add SCMI reset IDs which are used on Blaize BLZP1600 SoC.
> 
> Co-developed-by: James Cowgill <james.cowgill at blaize.com>
> Signed-off-by: James Cowgill <james.cowgill at blaize.com>
> Co-developed-by: Matt Redfearn <matt.redfearn at blaize.com>
> Signed-off-by: Matt Redfearn <matt.redfearn at blaize.com>
> Co-developed-by: Neil Jones <neil.jones at blaize.com>
> Signed-off-by: Neil Jones <neil.jones at blaize.com>
> Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos at blaize.com>
> ---
>  .../dt-bindings/reset/blaize,blzp1600-reset.h | 76 +++++++++++++++++++
>  1 file changed, 76 insertions(+)
>  create mode 100644 include/dt-bindings/reset/blaize,blzp1600-reset.h
> 
> diff --git a/include/dt-bindings/reset/blaize,blzp1600-reset.h b/include/dt-bindings/reset/blaize,blzp1600-reset.h
> new file mode 100644
> index 000000000000..ff1de6b1bd5c
> --- /dev/null
> +++ b/include/dt-bindings/reset/blaize,blzp1600-reset.h
> @@ -0,0 +1,76 @@
> +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */

Why 2.0+? Unusual choice. Do you really need it?


> +/*
> + * Copyright (C) 2022, Blaize, Inc.
> + */
> +
> +#ifndef DT_BINDING_RESET_BLZP1600_H
> +#define DT_BINDING_RESET_BLZP1600_H
> +
> +#define BLZP1600_A53_C0_HARD_RST	0
> +#define BLZP1600_A53_C0_SOFT_RST	1
> +#define BLZP1600_A53_C1_HARD_RST	2
> +#define BLZP1600_A53_C1_SOFT_RST	3
> +#define BLZP1600_A53_L2_CACHE_RST	4
> +#define BLZP1600_A53_DBG_RST		5
> +#define BLZP1600_GIC_RST		6
> +#define BLZP1600_CRYPTO_RST		7
> +#define BLZP1600_GSP_RST		9
> +#define BLZP1600_DRAM_A_SYS_RST		10
> +#define BLZP1600_DRAM_A_DDRC_RST	11
> +#define BLZP1600_DRAM_A_PRST		12
> +#define BLZP1600_DRAM_A_ARST		13
> +#define BLZP1600_DRAM_A_PHY_RST		14
> +#define BLZP1600_DRAM_A_PWRON_RST	15
> +#define BLZP1600_DRAM_A_PHY_PRST	16
> +#define BLZP1600_DRAM_B_SYS_RST		17
> +#define BLZP1600_DRAM_B_DDRC_RST	18
> +#define BLZP1600_DRAM_B_PRST		19
> +#define BLZP1600_DRAM_B_ARST		20
> +#define BLZP1600_DRAM_B_PHY_RST		21
> +#define BLZP1600_DRAM_B_PWRON_RST	22
> +#define BLZP1600_DRAM_B_PHY_PRST	23
> +#define BLZP1600_USB_RST		24
> +#define BLZP1600_USB_PHY_RST		25
> +#define BLZP1600_CAN0_RST		26
> +#define BLZP1600_CAN1_RST		27
> +#define BLZP1600_CAN2_RST		28
> +#define BLZP1600_ETH_MAC_RST		29
> +#define BLZP1600_SDIO0_RST		30
> +#define BLZP1600_SDIO1_RST		31
> +#define BLZP1600_SDIO2_RST		32
> +#define BLZP1600_SD_CARD_RST		34
> +#define BLZP1600_CSI0_CTRL_RST		35
> +#define BLZP1600_CSI0_VDMA_RST		36
> +#define BLZP1600_CSI1_CTRL_RST		37
> +#define BLZP1600_CSI1_VDMA_RST		38
> +#define BLZP1600_CSI2_CTRL_RST		39
> +#define BLZP1600_CSI2_VDMA_RST		40
> +#define BLZP1600_CSI3_CTRL_RST		41
> +#define BLZP1600_CSI3_VDMA_RST		42
> +#define BLZP1600_CSID_CTRL_RST		43
> +#define BLZP1600_CSID_VDMA_RST		44
> +#define BLZP1600_DSI_CTRL_RST		45
> +#define BLZP1600_DSI_VDMA_RST		46
> +#define BLZP1600_DMA_RST		49

You have some gaps here. These are IDs, so they do not have gaps.



Best regards,
Krzysztof