[PATCH] perf/arm-cmn: Fix DTC reset

Robin Murphy robin.murphy at arm.com
Thu Apr 6 07:49:15 PDT 2023


It turns out that my naive DTC reset logic fails to work as intended,
since clearing PMCR.PMU_EN appears to result in writes to PMOVSR_CLR
being ignored, while some hard-to-characterise combination of conditions
(differently between DTC0 and secondary DTCs) also appears to result in
PMOVSR reading as zero even when an overflow remains asserted. Thus
rather than resetting the PMU to a nice clean state, we can currently
end up with screaming spurious interrupts from secondary DTCs which we
can neither see nor clear. This behaviour is of course not documented.

Resetting PMCR to disable the interrupt output but enable the PMU itself
seems to at least make the PMOVSR_CLR write work as expected on DTC0
(although it looks like writing to PMCR twice has actually been having
some hidden side-effect of clearing any pending overflows there).
Unfortunately this still does not seem to help secondary DTCs, but going
beyond PMU scope and additionally resetting DTC_CTL does seems to make
everything work out, and superficially looks sensible. Therefore pile
that onto the house of empirical cards too, until I can check with the
hardware team whether there's actually any proper recommended way of
recovering from an arbitrary PMU state after an oops/kexec/whatever.

Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Reported-by: Geoff Blake <blakgeof at amazon.com>
Signed-off-by: Robin Murphy <robin.murphy at arm.com>
---
This supersedes the previous shutdown/IRQ patches, now that I've
finally managed to make *some* sense of what's really going on. If
anyone's interested, this is the contrivance I used for testing:

https://gitlab.arm.com/linux-arm/linux-rm/-/commit/d8f1035c5bc510516d6e4f0b7bf0b875a749daf7
---
 drivers/perf/arm-cmn.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index 144cc08d9e04..81fe01171e33 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -1899,7 +1899,10 @@ static int arm_cmn_init_dtc(struct arm_cmn *cmn, struct arm_cmn_node *dn, int id
 	if (dtc->irq < 0)
 		return dtc->irq;
 
-	writel_relaxed(0, dtc->base + CMN_DT_PMCR);
+	if (idx == 0)
+		writel_relaxed(0, dtc->base + CMN_DT_DTC_CTL);
+
+	writel_relaxed(CMN_DT_PMCR_PMU_EN, dtc->base + CMN_DT_PMCR);
 	writel_relaxed(0x1ff, dtc->base + CMN_DT_PMOVSR_CLR);
 	writel_relaxed(CMN_DT_PMCR_OVFL_INTR_EN, dtc->base + CMN_DT_PMCR);
 
-- 
2.39.2.101.g768bb238c484.dirty




More information about the linux-arm-kernel mailing list